PVC Line Fire Hose
sidewall-fire-sprinkler

  • Wholesale best Red Plastic Fire Hose Reel Nozzle
    Red Plastic Fire Hose Reel Nozzle
    Red Plastic Fire Hose Reel Nozzle 1.Product Introduction 1.Product introduction Suitable for use with most 25mm fire hose. The application of this range of nozzles is not restricted to use with only hose reel tubing and are ideally suited for use with any domestic, industrial or marine hoses. 2.Product Parameter  Code No. Inlet size WFRN019 3/4"; 19mm Jet / Spray WFRN025 1"; 25mm Jet / Spray 3.Products Features Red plastic construction Twist action - Jet / Spray Tail inlet 19mm,25mm Contact for best price now!
    read more
  • Wholesale best Plastic Cover Brass 1 Inch Fire Hose Reel Nozzle
    Plastic Cover Brass 1 Inch Fire Hose Reel Nozzle
    Plastic Cover Brass 1 Inch Fire Hose Reel Nozzle 1.Product Introduction This range is available with a choice with either 19mm or 25mm ribbed hose tail or with a 25mm (1″) male BSP thread. The threaded option allows a variety of British or International inlet adaptors to be screwed on for complete versatility of use. 2.Product Parameter  Code No. Inlet size WFHRN-019 3/4"; 19mm Jet / Spray WFHRN-025 1"; 25mm Jet / Spray 3.Products Features 1) Inlet: 3/4", 1"; Outlet: 18.5 2) Material:Brass and plastic  3) Quality: Guaranteed 4) Characteristic: Operation is easy and quick. Contact for best price now!
    read more
  • Fire Hose Reel Nozzle Price
    Brass Fire Hose Reel Nozzle Price
    Brass Fire Hose Reel Nozzle Price 1.Product Introduction The jet/spray brass hose reel nozzles are available with either a 19mm or 25mm serrated hose tail in Brass providing a durable, cost effective nozzle that can be either wired-on or clipped on to your chosen hose. A simple twist rotational nylon head allows for adjustment through jet and spray modes and provides an efficient water supply shut-off. Perfect for use with 19mm or 25mm hose reel tubing approved to EN671-1 supplied in rolls of 30 metres. 2.Product Parameter  Code No. Inlet size WFRN-019 3/4"; 19mm Jet / Spray WFRN-025 1"; 25mm Jet / Spray 3.Products Features a.Nozzles are precision machined to perform - straight stream through full fog and shutoff. b.Nozzles are listed for Class A and B fires. c.For agricultural equipment cleaning and fire protection. d.Suitable Medium: Water Contact for best price now!
    read more
  • Sprinkler Recessed Escutcheon Rosette
  • Rubber line Fire Hose
    3 Inch Red Color Fire Hose with Rubber Line
    3 Inch Red Color Fire Hose with Rubber Line High tensile strength ring-spun polyester yarn with a flexible Rubber/EPDM liner make it extremely tough when you need it to perform.  Feature and Benefit: -Sturdy. Single jacket, rubber lined hose made from 100% high tensile strength ring-spun polyester yarn with a lining of extruded EPDM. Excellent for tough applications such as construction sites, mines and industrial firefighting. -Reliable. The outside jacket utilizes a tight weave that is less likely to “catch” while dragging through the site and also helps to reduce kinking at low pressures, keeping the flow constant. -Identifiable. An optional color-coded stripe of one contrasting color can be woven into the outer jacket running the full length of the hose. -Versatile. Suitable for use with CAFS and foam solutions. -Certified. Manufactured within our ISO-9001 certified quality assurance system. Packaging/storage - Individually packed in cartons for ease of handling and shipping. Hose coils easily for storage Color : white,yellow,red,blue or other colors on request.  A color stripe can be added on the jacket, please inquire before placing the order. Couplings: Aluminum & Brass NPSH / NST / IPT expansion ring threaded coupling, Aluminum Storz, instantaneous BS couplings or other type of couplings on request.  Specifications: We serve customers for over 30 years — so we’ve got the knowledge and industry experience to help you get it right!
    read more
  • Fluororubber line high temperature resistant fire hose
    Anti Puncture High Temperature Resistant Hose
    Anti Puncture High Temperature Resistant Hose   Kevlar Hose is made from kevlar jacket with Fluorine rubber.     Our High Temperature Hose is the ultimate for high heat protection as its outer jacket is made of anti puncture fiber. It exceeds all known standards for heat resistance and is so durable, it's virtually indestructible. No other jacketed hose can prevent hose failure due to flame exposure like this hose. It even resist ozone and mildew. Superior cut and abrasion resistance enhances its outstanding durability - Certainly the prefect hose for industrial firefighting. Feature and Benefit: -Flexible to lay out and roll up.  -High-Temperature Resistant from -40°C to 200°C. -Resistant to ozone and oxidation. -Reliable. The outside jacket kevlar ensure a very high working pressure. -Versatile. Well suited for construction sites, mines, and industrial firefighting solution application. -Certified. Manufactured within our ISO-9001 certified quality assurance system. Packaging/storage - Individually packed in cartons for ease of handling and shipping. Hose coils easily for storage Applications Features · Fire brigade · Industry · Engineering · High temperature resistant · Ozone and mildew resistant · Cut and abrasion resistant · Acid and alkaline resistant Temperature Range: -113° to 302°F (-45° to +150°C ) We serve customers for over 30 years — so we’ve got the knowledge and industry experience to help you get it right. Let the professionals at Winner Fire help you select the products that meet your exact needs.  Send inquiry now.
    read more
  • Wholesale best BS336 Standard John Morris Fire Hose Couplings
    BS336 Standard John Morris Fire Hose Couplings
    Product Items: BS336 Standard John Morris Fire Hose Couplings 1.BS336 Standard John Morris Fire Hose Couplings Features 1. Quick connect 2.Material: Aluminum 3.Quality Standard: CCC,ISO,BS336 Standard 4.OEM/ODM service for diameter, material, logo, working pressure etc. 2.John Morris Fire Hose Coupling Applications: 3. Why Choose Us *Easy to connect and disconnect *Experienced R&D teams *prompt delivery *accept small order Just Contact us directly for more information.
    read more
  • BS336 Standard  Brass John Morris Fire Hose Coupling
  • Foam Nozzle Fire
    DN15 Foam Nozzle Fire
    DN15 Foam Nozzle Fire: Foam/water sprinkler systems are more economical than a water-only system, when evaluated for the same risk. They provide for actual extinguishment of the fire and a lower water demand. The conversion assists in the reductionof property loss, loss of life and in many cases the reduction of insurance rates. In most instances, fires cause more than structural and inventory damages. Many manufacturing and storage facilities have various flammable products that are protected by water sprinkler systems alone. The water sprinkler system may extinguish the fire; however, this type system has the two potential problems. If the water only system is not capable of quick extinguishment, the product containers can erupt and spill. Also it typically requires a great deal of water to extinguish a flammable liquid that is miscible in water or in many cases, the flammable liquid floats on the water and then the water becomes the vehicle that spreads the fire. Both the large amounts of water and the flammable liquids are normally washed into the local drain systems which can contaminate the water supplies and aquifers. Along with the financial loss of the manufacturing/storage facilities and products, there is the expense of contamination cleanup. Foam systems can facilitate in quick extinguishment and water reduction. In a single year, the National Fire Protection Association documented fires that involved flammable liquids with direct losses of over $1 billion. The extended losses includingthe close of businesses, cost of environmental cleanup and increased insurance costs are inconceivable.   Techincal Data: Sprinkler Body Material Brass Net Material SS304 Deflector Material Brass Installation Pendent Thread Connection 1/2" BSP Surface Finishing Brass Chromed Application Fire Protection Media Water ,Foam K Factor 3.0 Max Working Pressure 175 psi (12,1 bar) Size(mm) 15(1/2) 20(3/4) 25(1") Working Pressure(Mpa) 0.4 0.4 0.4 Flow Rate(L/S) 50 70 90 Foaming Level ≥5 ≥5 ≥5 25% dessection 120s 120s 120s K 25 35 45 Material Brass Brass Brass
    read more
  • Gost Fire Hose Nozzle
    Aluminum Gost 2 inch Fire Hose Nozzle
    Aluminum Gost 2 inch Fire Hose Nozzle   1.Product introduction  Gost fire hose nozzle is a fire extinguishing device connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.   2.Product Parameter  Material Aluminum Size 51mm / 66mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Solid uniform Jet Pattern  
    read more
  • Fire Hose Nozzle
    2.5 inch John Morris Instaneous Fire Fighting Branch Pipe
    2.5 inch John Morris Instaneous Fire Fighting Branch Pipe   1.Product Description Branch pipe,its inlet connection is 21/2” male instantaneous and outlet is Solid Jet nozzle.Material of construction maybe copper alloy or aluminum alloy.   2.Product Parameter  Material Brass Aluminum Size 65mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Solid uniform Jet Pattern   3.Products Features A.Its operating pressure is 150 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach. B.This nozzle is available with two orifice sizes:12mm and 19mm C.Application:hydrant system,wet or dry riser system 
    read more
  • Fire Fighting Spray Nozzle
    UNI 45 Fire Fighting Spray Nozzle
    UNI 45 Fire Fighting Spray Nozzle   1.Product Introduction  UNI 45 fire fighting spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.   2.Product Parameter  Material Aluminum  Size 45mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray
    read more
  • Fire Hose Spray Nozzle
    Lancia Frazionatrice UNI 45 Plastic Fire Hose Spray Nozzle
    UNI 45 Plastic Fire Hose Spray Nozzle 1.Product Introduction  UNI 45 plastic fire spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.   2.Product Parameter  Material Aluminum & Plastic Size 45mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray
    read more
  • Fire Hose Spray Nozzle
    Lance Variomatic UNI 45 PVC Rotating Fire Nozzle
    Lance Variomatic UNI 45 PVC Rotating Fire Nozzle   1.Product Introduction  This is a device used to supply water, provided with a nozzle with a suitable section and a unified connection. The lance can also be equipped with a valve that allows the full jet, the split jet and the closure.   2.Product Parameter  Material PVC Size 45mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray   3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Gun Type Fire Nozzle
    115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle
    115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle   Winner WFSN-475 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-475 has four flow classes,115-230-360-475 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube   Product Parameter    Weight (excl.coupling) 1.6 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Dupont Nylon Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 16 bar (232 psi) Max. fog angle 130 ° Throw range 40 meter @ 7 bar Flow range (selectable) 115 LPS @7 bar 230 LPS @7 bar 360 LPS @7 bar 475 LPS @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.
    read more
  • Turbojet
    Turbojet 50 - 235 LPM Fire Hose Nozzle
    50 - 235 LPM Spray Jet Fire Hose Nozzle Winner WFSN-235 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-230 has four flow classes,50-100-150-235 LPM, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair   Product Parameter    Model Number TN - C Weight 1.4kg Fire nozzle body Material Anodized Aluminum Fire Nozzle Handler Material Horseshoe (Injection Molded Nylon black Handle) Fire Nozzle Bumper Material Rubber  Swivel Inlet 1.5" ( 40mm ) recommended Coupling Storz/NH/BSP/Russian type, etc. Valve Type Aluminum / SS Flow Control Method 50-100-150-235 L/min Working Pressure  6 Bar Max Reach @ Max Flow 28 m Max fog angle 130 degree Fire Nozzle Type Pistol Grip 
    read more

top

Online Now