PVC Line Fire Hose
fire-extinguisher-box-for-picnic

  • Drip Torch
    Forestry Bush Drip Torch 5L
    Forestry Bush Drip Torch 5L A drip torch is a tool used in wild land fire fighting, controlled burning, and other forestry applications to intentionally ignite fires.    The drip torch consists of a canister that holds fuel with a handle attached to the side, a spout with a loop (pigtail) to prevent fire from entering the fuel canister, a breather valve to allow air into the canister while fuel is exiting through the spout, and a wick from which flaming fuel is dropped to the ground. The wick is ignited and allows the fire to be directed as needed. The typical fuel used is a mixture of petrol and diesel. In plantations and environmental management, the drip torch is the most common tool used to ignite prescribed burns, which are used to remove excess fuel buildup or to re-create natural cycles of fire in an ecosystem.   Features: - Full-length handle.  - “Big Mouth” design for easier filling. - A fuel trap on the spout prevents flashback into tank. - A check valve in the cover provides a second level of protection against flashback. Breather valve, oilproof gaskets and sealed outlets prevent spills and fuel-slopping. Technical Parameters: Material Iron Capacity 5L Finish Red Powder Coated Application Forestry, bush, wildland fire igniter   Note: For professional use only. Training and fuel selection are the sole responsibility of the user.  
    read more
  • Universal Spanner Wrench
    Universal Spanner Wrench for Rocker Lug Pin Lug Couplings
    Universal Spanner Wrench for Rocker Lug Pin Lug Couplings   The all-purpose universal wrench for 3/4" to 3" rocker lug and pin lug couplings. Features a belt hook eye, hammer head and a gas cock shutoff.   Features: Made from High Tensile Aluminum   Features a Belt Hook Eye Features a Hammer Head Features a Gas Shutoff Features Pry Bar Type End Applications/Solutions Firefighting - Wildland Forestry
    read more
  • Wholesale best Forestry Fire Fighting Tools Kit
    Forestry Fire Fighting Tools Kit
    Forestry Fire Fighting Tools Kit Forestry fire fighting tools kit includes forestry coupling spanners, fire hose shutoff clamp, forestry nozzles, check valve, foot valve strainer with a suction adaptor, and dividing breeching. Two packing ways, hard alu case / shoulder bag for choice.
    read more
  • Machino Hose Nozzle
    Fire Protection Water Jet Machino Hose Nozzle
    Fire Protection Water Jet Machino Hose Nozzle   1. Product Introduction  Machino Hose Nozzles feature solid stream jetting water and are widely demanded in fire brigades as the primary firefighting nozzle. It is offered in different metals as per the requirements. This long fire nozzle made of lightweight aluminum alloy suits the general flow and operational needs.    2. Product Parameter  Material Aluminum Alloy Size 1.5 / 2.5 Inch Working pressure 16 Bar Discharge pattern Jet 
    read more
  • Branch Pipe Nozzle
    Fire Protection Instaneous Jet Spray Fire Hose Branch Pipe Nozzle
    Fire Protection Instaneous Jet Spray Fire Hose Branch Pipe Nozzle   1. Product Introduction  Fire Protection Jet Spray Nozzles are widely demanded in fire brigades as the primary firefighting nozzle. It is offered in different metals as per the requirements. This long fire nozzle made of light weight aluminum alloy suits the general flow and operational needs.    2. Product Parameter  Material Aluminum Alloy Size 2.5 Inch Working pressure 16 Bar Discharge pattern Jet / Spray
    read more
  • Fire Hose Rack
    Aluminum Flexible Fire Hose Rack
    Aluminum Flexible Fire Hose Rack Flexible Fire Hose Racks are also known as hydrant combs, because of their comb-like shape. A hose rack is a tool that is mounted on a hydrant box to store or hang a fire hose (fire hose). With the hose rack, it can quickly be taken to the location of the fire. The hose rack helps to organize the fire hoses so that they are neatly arranged so that the hoses can quickly decompose and speed up extinguishing.   The hose rack can be used for indoor or outdoor type hoses.   Features and Benefits Special rotary design for easy and quick operation Provides an immediate water source for fire control and suppression Suitable for building occupant use  Permits one-person operation 
    read more
  • Pump Hand Primer
  • Forestry Fire Hose
  • 4 Way Hose Splitter
    Forestry Manifold 4 Way Heavy Duty Brass Garden Hose Splitter
    Forestry Manifold 4 Way Heavy Duty Brass Garden Hose Splitter Converts a single water outlet into 4 ways, very convenient for you to control the work in different places at the same time. Made of high-quality heavy-duty brass materials, solid and durable, corrosion proof, and has a long service time. All the hose connectors can be turned on and off individually, so you can use one or others according to your need.   Features: 4-Way Hose Splitter: Converts a single water outlet into 4 ways, which makes it very convenient for you to control the work in different places simultaneously.  High Quality: Made of high-quality heavy duty brass materials, solid and durable, corrosion proof and has a long service time. Individually Controlled: All the hose connectors can be turned on and off individually, so you can use one or others according to your need. Completely Leak-tight: Garden hose connectors are equipped with high-quality ball valves for tight closure. The garden hose separator effectively prevents any leakage or dripping.
    read more
  • Forestry Fire Hose
    1.5inch x 100ft 38mm x 30m Forestry Fire Hose
    1.5inch x 100ft 38mm x 30m Forestry Fire Hose  Durable exterior jacket woven from 100% ring-spun polyester yarn with a single-ply extruded tube liner made of synthetic rubber or synthetic polyurethane to resist ozone. The use of thin lining is designed to increase packing ability for forestry fire fighting and applications where a lightweight fire hose is desired.   Applications Forest firefighting Brush firefighting Grass firefighting Wildland firefighting Light Industrial Use Test Ratings (Water Only With Expansion Ring Couplings) Service Pressure (A 3-minute hydrostatic test conducted by users on in-service hose to determine suitability for continued service) Proof Test Pressure (A pressure equal to a least two times the service test pressure) PSI Burst Test Pressure

    Related Tags :

    38mm fire hose
    read more
  • Fire Hose Binding Machine
    Electric Fire Hose Binding Machine
    Electric Fire Hose Binding Machine Our electric hose binding machine is suitable for quick and effortless binding of all types of delivery hoses.   The machine is table mounted and comes with two adjustable wire reels, as well as a hose tray made of square bar steel tube with slewable hose tub for the accommodation of delivery hoses. The switch is foot controlled and reversible.   Electric motor: 220V/380V, 0.55 W, 50 Hz, 3 phase current, comes complete with cable.   Feature Safe & Reliable  Simple & easy to operate  Very compact, occupying only a small workshop area  Parts are very easily replaceable Comes with a wire rack to store binding wire in a neat manner.   Applications • Required for professional workshops maintaining hoses
    read more
  • Bubble Cup Nozzle
    Bubble Cup Fire Foam Water Nozzle with Shut Off
    Bubble Cup Fire Foam Water Nozzle with Shut Off   The dual or single-gallonage Bubble Cup is a uniquely designed aspirating fog/foam nozzle specially created to be used with AFFF and Protein type foams for fire brigades and hazardous materials incidents or for structural and wildfire applications of Class A foaming agents.   Capable of producing a conventional straight stream, wide protective fog pattern as well as aspirating foam, the Bubble Cup is a versatile nozzle that provides an extra measure of protection not found in any other aspirating foam nozzle. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels, Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) Integrated foam attachment   Product Parameter    Weight (excl. coupling) 2.13 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Nylon Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 16 bar (232 psi) Max. fog angle 130 ° Throw range 34 meter @ 7 bar Flow range (selectable) 115 LPM @7 bar 230 LPM @7 bar 360 LPM @7 bar 475 LPM @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.
    read more
  • Smooth Bore Nozzle
    CAFS Foam Smooth Bore Nozzle
    CAFS Foam Smooth Bore Nozzle This very durable, pistol-grip ball shut-off features a whole unobstructed 1-1/2" ball opening. With the tip removed, this shut-off does not "strip" any bubbles from the CAFS stream. It, therefore, can produce the "shaving cream" type foam product. The 7/8" - 22mm smooth bore tip when installed slightly shapes the stream and holds back a bit of CAFS pressure to keep the hoseline stiffer and avoid kinking. This combo is a staple on ant CAFS truck. Main Features · Mainly for firefighting forces for various fires and different fire changes. · Made of strong lightweight aluminum alloy, anodized surface treatment. · 360-degree swivel,anti-hose knot · Easy to open and close the water flow by the fastball valve switch · Little recoil force. · Ergonomic, anti-slip polyurethane pistol grip.     Product Parameter    Weight (excl. coupling) 1.5 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Nylon Working pressure 7 bar (100 psi) Flow rate 600 LPM @7 bar Medium Water / Foam Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.
    read more
  • Fire Nozzle Gun
    1 Inch Compact Wildland Forest Fire Nozzle Gun
    1 Inch Compact Wildland Forest Fire Nozzle Gun Winner Forest Fire Nozzle is an economical, lightweight, and dependable nozzle. Their rugged construction is compatible with the use of freshwater as well as firefighting foam concentrate. Other important operating features include: * Quick-acting pattern control from straight stream to wide fog * Spinning stainless steel teeth; * Stainless stainless mesh filter; * Easily flushable while flowing to clear trapped debris; * Quick-change fire hose coupling;   Forest Fire Nozzle has a selectable flow range at 7 bar of 15, 30, 45, and 60 litres per minute to meet the individual needs of the firefighter at any given time but alternative flow rates are available.   Features:   Model TN - D Flow rate 50-100-150-235 LPM Working  pressure 6 Bar Inlet size   1"   Coupling srandard QC, STORZ, NH (Optional) Material Anodized aluminium alloy
    read more
  • Double Jacket Fire Hose
    Heavy Duty Double Jacket Fire Hose
    - Combines two layer jackets outside the rubber lining - Extra sturdy and extra abrasion resistant in demanding conditions.
    read more
  • Storz Reduction Coupling
    Aluminum Storz Reduction Coupling
    1. Aluminum Material,Great quality. 2.Quality standard to the International fire fighting equipment with ISO9001 quality management approve. 3.Service: OEM/ODM service for diameter, material, length, painting color working pressure etc.
    read more

top

Online Now