PVC Line Fire Hose
Products

  • Oblique landing valve
    2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve
    2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve Landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply. The landing valves are oblique type with threaded inlet and are manufactured with delivery hose connection and blank cap. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Technical Data Valve Type Oblique, Threaded Inlet Pressure Rating Low Pressure Valve Nominal Size DN 2 1/2" Working Pressure 15 Bar Maximum Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure
    inquiry now read more
  • Straight Through Landing Valve
    2.5 Inch Straight Through Landing Valve
    2.5 Inch Straight Through Landing Valve Straight through landing valve is available in two types screw and flanged. There are suitable for installation on wet risers in a building or a hydrant, manufactured to comply to BS 5041 Part 1:1987 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.   Product Parameter Code No. WFLV - ST25 Body Material Copper Alloy Inlet 2.5”BSP male thread or flanged according to BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap &   chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5   Bar • Body Test at 22.5   Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet   Pressure   Products Features Body material : copper alloy Hand wheel :grey cast iron  Blank cap material :copper alloy  The hand wheel is BLACK painted and body to RED
    inquiry now read more
  • fire hydrant landing valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve Oblique landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply. The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Product Parameter  Code No. WFLV - F25 Body Material Copper Alloy Inlet 2.5”BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap & chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure   Products Features Body material made of copper alloy to EN 1982 Hand wheel material made of grey cast iron to BS EN 1561 Blank cap material made of copper alloy to EN 1982 Possible to replace the gland seal when under pressure with the valve fully closed Disc facing rubber is of replaceable type Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use The hand wheel is BLACK painted and body to RED
    inquiry now read more
  • Pressure Regulating Landing Valve
    2.5 Inch Pressure Regulating Landing Valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve The landing valves are pressure reducing type designed to provide a range of outlet pressure (5 bar -8 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar. High quality with most favourable price. Pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.   Code No. Inlet Outlet WFLV - PR25 BS4504 PN16 65MM 2.5”BS336 INST.FEMALE WFLV - PR25A BS4504 PN16 80MM 2.5”BS336 INST.FEMALE WFLV - PR25B Male BSP Thread 65mm 2.5”BS336 INST.FEMALE  Valve type:Oblique flanged inlet Pressure Rating:HP or LP Nominal Size:DN65 Test pressure:valve seat test at 22bar,body test at 30bar Flange drilling:BS4504   Product Features: 1. Suitable for inlet pressure up to 20bar 2.Reduced outlet static pressure can be set from 5 to 8bar 3.Outlet pressure remain constant with inlet pressure range from 7bar to 20bar 4. Pressure test to 30bar 5.Minimum Flowrate up to 1400L/M 6.Body : Copper Alloy to BS 1400 7.Handwheel : Grey Cast Iron to BS 1452 8.Inlet:Male 2.5"BSP 9.Outlet : Female instantaneous to BS 336 and other connections
    inquiry now read more
  • 2 Way Breeching Inlet
    2 Way Breeching Inlet for Riser
    2 Way Breeching Inlet for Riser Two Way Inlet Breeching Valve comply fully with the requirements of BS5041 Part 3. The bodies are manufactured from cast iron or spheroildal graphite iron and all fittings are in gunmetal making these inlet breechings extremely durable.   The 2-way dry riser inlet breeching has 2 x 2½” Instantaneous male non return valve inlets and a 4″ PN16 or Table D outlet flange. The 4-way inlet breeching has 4 x 2½” Instantaneous male non return valve inlets and a 6″ PN16 or Table D outlet flange. The 2-way and 4-way also comes complete with 1″ drain valve.   Product Parameter Code No. WFBL- 2 Inlet 2 Nos.   2-1/2” Male Instantaneous Connector Complying to BS 336 Outlet 100mm Flange outlet Working Pressure 16 Bar Test pressure Hydrostatically tested   to 24,Non-return valve tested to 22.5 bar Flange size BS 4504 / BS10D TABLE D   Products Features Manufactured in accordance with BS 5041 : Part 3 : 1975. High quality casting finishes. 25 mm drain valve with blanking cap and chain. Vertical or horizontal mounting.
    inquiry now read more
  • 4 Way Breeching Inlet
    Dry Riser Inlets 4 Way Breeching Inlet
    Dry Riser Inlets 4 Way Breeching Inlet Breeching inlets are suitable for installation on dry risers only, in a building for fire fighting purposes, fitted with inlet connection at fire brigade access level and outlet connection at specified points, which is normally dry but capable of being charged with water by pumping from fire service appliances. The breeching inlets are manufactured to comply with BS 5041 PART-3:1975 standard comprising of male instantaneous connections complying with BS 336:2010, drain valves complying with BS 5154, PN16 rated and non return valves. The breeching inlets and its fittings are suitable for a normal working pressure of 10 bar.   Products Features Body material made of spheroidal graphite cast iron (Ductile Iron) to BS 1563:2011 Inlet connection and non-return valves material made of copper alloy to BS 12163:2011 Each inlet connections are fitted with non-return valve and are of spring loaded mushroom type Each breeching inlet is painted RED internally and externally   Product Parameter Code No. WFBL- 4 Body Material Cast Iron Inlet  4 x 2 1/2" Male   instantaneous connections to BS336 each with spring-loaded non-return valve   and blanking cap & chain Outlet Flanged 6"  BS10  Table F or 150mm    BS4504  PN16 Pressure Rating Normal Working Pressure   of 16 Bar Test pressure 24 Bar Flange Drilling BS 4504 Part: 2:1974   Table: 16/21
    inquiry now read more
  • Wholesale best Ductile Iron Fire Hydrant Valve for Vietnam Russia
    Ductile Iron Fire Hydrant Valve for Vietnam Russia
    Ductile Iron Fire Hydrant Valve for Vietnam Russia Fire Hydrant Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship . normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .   Type: indoor fire hydrant Model: WFHV - 50 Material: made of ductile material Inlet interface: 50 mm-2 inch / 65mm - 2.5 inch Intake type: cylindrical pipe female thread Outlet type: cylindrical pipe male thread with duct buckle Outlet Diameter: 50 mm / 2 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: certification: ISO9001 in accordance with GB3445 china national standard
    inquiry now read more
  • 2.5 inch Rotary pressure reducing and stabilizing fire hydrant equipment
    2.5 inch Rotary pressure fire hydrant equipment
    1.Quality standard:ISO and CCCF certified,GB national fire fighting equipment standard 2.Material:cast iron 3.fast delivery 4.Rotary pressure reducing and stabilizing 5.Service: OEM/ODM, time sales and after sales service Product Item:2.5 inch Rotary pressure fire hydrant equipment 2.5 inch Rotary preassure fire hydrant equipment details: Model: SNZW65-1 Features: Rotary pressure reducing and stabilizing Material: made of cast iron.  Inlet interface: 65mm / 2.5 inch  Intake type: cylindrical pipe female thread Intake  working pressure: 1.6 Mpa  Height of valve opening: 8.5 mm For water and foam mixed liquid only  Standard: certification: ISO9001 in accordance with GB3445 china national standard Indoor Fire Hydrant system for fire fighting types: Structural mode and specification of reduced indoor fire hydrant: 1. Single valve with single hydrant for indoor (SN50, SN65) 2.  Double valves with double hydrants for indoor (SNSS6I) 3. Rotary indoor fire hydrant (SNZ65) 4. Pressure reducing and stabilizing fire hydrant (SNW65-I) 5. Rotary pressure reducing and stabilizing fire hydrant (SNZW65-I) All the fire hydrants meet the GB3445-2005 international standard for indoor fire hydrant Apply material: clean water, foam admixture liquids
    inquiry now read more
  • Wholesale best Pressure reducing and stabilizing fire hydrant
    Pressure reducing and stabilizing fire hydrant
    Product Item:Brand indoor Rotary pressure reducing and stabilizing fire hydrant 1.Quality standard:ISO and CCCF certified,GB national fire fighting equipment standard 2.Material:cast iron 3.fast delivery 4.Rotary pressure reducing and stabilizing 5.Service: OEM/ODM, time sales and after sales service  indoor Rotary pressure reducing and stabilizing fire hydrant details: Model: SNZW65-1 Features: Rotary pressure reducing and stabilizing Material: made of cast iron.  Inlet interface: 65mm / 2.5 inch  Intake type: cylindrical pipe female thread Intake  working pressure: 1.6 Mpa  Height of valve opening: 8.5 mm For water and foam mixed liquid only  Standard: certification: ISO9001 in accordance with GB3445 china national standard How to use indoor Rotary pressure reducing and stabilizing fire hydrant? Successful Case
    inquiry now read more
  • Wholesale best Indoor Fire Hydrant system for fire fighting
  • Wholesale best Fire fighting equipment indoor hydrant
    Fire fighting equipment indoor hydrant
    Product Item:Fire fighting equipment indoor hydrant 1.Quality standard:ISO and CCCF certified,GB national fire fighting equipment standard 2.Material:cast iron 3.fast delivery 4.Rotary preassure reducing and stabilizing 5.Service:OEM/ODM, time sales and after sales service 6.Fire fighting equipment indoor hydrant applications: to office, factory, school, buildings,ect. Indoor Fire Hydrant system for fire fighting types: Structural mode and specification of reduced indoor fire hydrant: 1. Single valve with single hydrant for indoor (SN50, SN65) 2.  Double valves with double hydrants for indoor (SNSS6I) 3. Rotary indoor fire hydrant (SNZ65) 4. Pressure reducing and stabilizing fire hydrant (SNW65-I) 5. Rotary pressure reducing and stabilizing fire hydrant (SNZW65-I) All the fire hydrants meet the GB3445-2005 international standard for indoor fire hydrant Apply material: clean water, foam admixture liquids
    inquiry now read more

top

Online Now