PVC Line Fire Hose
fire-hose-with-nozzle

  • BS336 Standard  Brass John Morris Fire Hose Coupling
  • Foam Nozzle Fire
    DN15 Foam Nozzle Fire
    DN15 Foam Nozzle Fire: Foam/water sprinkler systems are more economical than a water-only system, when evaluated for the same risk. They provide for actual extinguishment of the fire and a lower water demand. The conversion assists in the reductionof property loss, loss of life and in many cases the reduction of insurance rates. In most instances, fires cause more than structural and inventory damages. Many manufacturing and storage facilities have various flammable products that are protected by water sprinkler systems alone. The water sprinkler system may extinguish the fire; however, this type system has the two potential problems. If the water only system is not capable of quick extinguishment, the product containers can erupt and spill. Also it typically requires a great deal of water to extinguish a flammable liquid that is miscible in water or in many cases, the flammable liquid floats on the water and then the water becomes the vehicle that spreads the fire. Both the large amounts of water and the flammable liquids are normally washed into the local drain systems which can contaminate the water supplies and aquifers. Along with the financial loss of the manufacturing/storage facilities and products, there is the expense of contamination cleanup. Foam systems can facilitate in quick extinguishment and water reduction. In a single year, the National Fire Protection Association documented fires that involved flammable liquids with direct losses of over $1 billion. The extended losses includingthe close of businesses, cost of environmental cleanup and increased insurance costs are inconceivable.   Techincal Data: Sprinkler Body Material Brass Net Material SS304 Deflector Material Brass Installation Pendent Thread Connection 1/2" BSP Surface Finishing Brass Chromed Application Fire Protection Media Water ,Foam K Factor 3.0 Max Working Pressure 175 psi (12,1 bar) Size(mm) 15(1/2) 20(3/4) 25(1") Working Pressure(Mpa) 0.4 0.4 0.4 Flow Rate(L/S) 50 70 90 Foaming Level ≥5 ≥5 ≥5 25% dessection 120s 120s 120s K 25 35 45 Material Brass Brass Brass
    read more
  • Gost Fire Hose Nozzle
    Aluminum Gost 2 inch Fire Hose Nozzle
    Aluminum Gost 2 inch Fire Hose Nozzle   1.Product introduction  Gost fire hose nozzle is a fire extinguishing device connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.   2.Product Parameter  Material Aluminum Size 51mm / 66mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Solid uniform Jet Pattern  
    read more
  • Fire Hose Nozzle
    2.5 inch John Morris Instaneous Fire Fighting Branch Pipe
    2.5 inch John Morris Instaneous Fire Fighting Branch Pipe   1.Product Description Branch pipe,its inlet connection is 21/2” male instantaneous and outlet is Solid Jet nozzle.Material of construction maybe copper alloy or aluminum alloy.   2.Product Parameter  Material Brass Aluminum Size 65mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Solid uniform Jet Pattern   3.Products Features A.Its operating pressure is 150 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach. B.This nozzle is available with two orifice sizes:12mm and 19mm C.Application:hydrant system,wet or dry riser system 
    read more
  • Fire Fighting Spray Nozzle
    UNI 45 Fire Fighting Spray Nozzle
    UNI 45 Fire Fighting Spray Nozzle   1.Product Introduction  UNI 45 fire fighting spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.   2.Product Parameter  Material Aluminum  Size 45mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray
    read more
  • Fire Hose Spray Nozzle
    Lancia Frazionatrice UNI 45 Plastic Fire Hose Spray Nozzle
    UNI 45 Plastic Fire Hose Spray Nozzle 1.Product Introduction  UNI 45 plastic fire spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.   2.Product Parameter  Material Aluminum & Plastic Size 45mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray
    read more
  • Fire Hose Spray Nozzle
    Lance Variomatic UNI 45 PVC Rotating Fire Nozzle
    Lance Variomatic UNI 45 PVC Rotating Fire Nozzle   1.Product Introduction  This is a device used to supply water, provided with a nozzle with a suitable section and a unified connection. The lance can also be equipped with a valve that allows the full jet, the split jet and the closure.   2.Product Parameter  Material PVC Size 45mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray   3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Gun Type Fire Nozzle
    115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle
    115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle   Winner WFSN-475 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-475 has four flow classes,115-230-360-475 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube   Product Parameter    Weight (excl.coupling) 1.6 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Dupont Nylon Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 16 bar (232 psi) Max. fog angle 130 ° Throw range 40 meter @ 7 bar Flow range (selectable) 115 LPS @7 bar 230 LPS @7 bar 360 LPS @7 bar 475 LPS @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.
    read more
  • Turbojet
    Turbojet 50 - 235 LPM Fire Hose Nozzle
    50 - 235 LPM Spray Jet Fire Hose Nozzle Winner WFSN-235 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-230 has four flow classes,50-100-150-235 LPM, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair   Product Parameter    Model Number TN - C Weight 1.4kg Fire nozzle body Material Anodized Aluminum Fire Nozzle Handler Material Horseshoe (Injection Molded Nylon black Handle) Fire Nozzle Bumper Material Rubber  Swivel Inlet 1.5" ( 40mm ) recommended Coupling Storz/NH/BSP/Russian type, etc. Valve Type Aluminum / SS Flow Control Method 50-100-150-235 L/min Working Pressure  6 Bar Max Reach @ Max Flow 28 m Max fog angle 130 degree Fire Nozzle Type Pistol Grip 
    read more
  • Turbo Jet Fire Hose Nozzle
    200 - 760 LPM Turbo Jet Fire Hose Nozzle
    200 - 760 LPM Turbo Jet Fire Hose Nozzle   Winner turbo jet fire nozzle is a constant flow nozzle(flow remains constant and stable in all patterns). It can remain working when you change from different modes straight stream, fog spray or flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube   Product Parameter    Weight (excl.coupling) 2.2 kgs Material Body Lightweight hard anodized aluminum Valve ABS Handle Horseshoe (Injection Molded Nylon red Handle) Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 130 ° Throw range 52 meter @ 7 bar Flow range 200 - 760 LPM (Automatic) Flush Inlet Size 1.5" (40 mm) Inlet coupling style Storz,INST.,NH,GOST,etc.
    read more
  • Pistol Grip Fire Nozzle
    360 - 950LPM Adjustable Flow Handline Pistol Grip Fire Nozzle
    360 - 950LPM Adjustable Flow Handline Pistol Grip Fire Nozzle Winner WFSN-950 pistol grip fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-950 has four flow classes,360-475-570-760-950 LPM, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube   Product Parameter  Model Number QLD6.0/15III-C Weight 2.7 kg Operation Type Handline Spray Pattern  Jet and fog Spray Swivel Inlet 2.5" ( 65mm ) recommended Coupling Storz/NH/BSP/Russian type, etc. Length 260mm Flow Control Method 360-475-570-760-950 L/min Working Pressure  7 Bar Max Reach @ Max Flow 37 m Max fog angle 130 degree Nozzle Type Selectable Flow Nozzle Media Water Application Fire fighting, Industrial
    read more
  • Fire Water Nozzle
    400 - 2000LPM Fireman Holds and Adjust Fire Water Nozzle
    400 - 2000LPM Fireman Holds and Adjust Fire Water Nozzle Winner WFSN-2000 pistol grip fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-950 has four flow classes,400-2000 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube   Product Parameter    Swivel Inlet 1.5" ( 40mm ) recommended Operation Type Pistol Grip Type Nozzle Type Automatic Nozzle,constant pressure, variable flow, constant gallonage, flow does not change with pattern Inlet Size 1.5 inch ,2 inch ,2.5 inch Coupling Storz/NH/BSP/Russian type, etc. Flow Rate 400-2000 L/min automatic Spray Pattern Jet and fog spray Media Water Application Fire fighting,fire hose,firefighter,fire hydrant Working Pressure 7 Bar Max Reach@Max Flow 60 Meters Max Fog Angle 120 degree
    read more
  • Pillar Hydrant
    High Quality 2 Ways with Valves Wet Barrel Pillar Hydrant
    High Quality 2 Ways with Valves Wet Barrel Pillar Hydrant British wet hydrant is used in warm areas with water in the barrel always. The outlets are individually controlled and the mechanical parts are easy to access above ground.   Specification Body material: Cast Iron to BS 1452 Inlet : 4" Table T BS 10 Flange Outlet: Copper Alloy 2x2.5" Control Valve with Female BS Inst. Outlet Test pressure: 30bar(435 psi) Working pressure: 20bar(290 psi) Finishing: Red Epoxy coated   2.Parameters Body       Ductile iron as BS 1452 O-ring NBR Valve Assembly Brass / Bronze Hose Outlet  2 x 2.5“ BS336
    read more
  • Oblique landing valve
    2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve
    2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve Landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply. The landing valves are oblique type with threaded inlet and are manufactured with delivery hose connection and blank cap. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Technical Data Valve Type Oblique, Threaded Inlet Pressure Rating Low Pressure Valve Nominal Size DN 2 1/2" Working Pressure 15 Bar Maximum Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure
    read more
  • fire hydrant landing valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve Oblique landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply. The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Product Parameter  Code No. WFLV - F25 Body Material Copper Alloy Inlet 2.5”BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap & chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure   Products Features Body material made of copper alloy to EN 1982 Hand wheel material made of grey cast iron to BS EN 1561 Blank cap material made of copper alloy to EN 1982 Possible to replace the gland seal when under pressure with the valve fully closed Disc facing rubber is of replaceable type Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use The hand wheel is BLACK painted and body to RED
    read more
  • 2 Way Breeching Inlet
    2 Way Breeching Inlet for Riser
    2 Way Breeching Inlet for Riser Two Way Inlet Breeching Valve comply fully with the requirements of BS5041 Part 3. The bodies are manufactured from cast iron or spheroildal graphite iron and all fittings are in gunmetal making these inlet breechings extremely durable.   The 2-way dry riser inlet breeching has 2 x 2½” Instantaneous male non return valve inlets and a 4″ PN16 or Table D outlet flange. The 4-way inlet breeching has 4 x 2½” Instantaneous male non return valve inlets and a 6″ PN16 or Table D outlet flange. The 2-way and 4-way also comes complete with 1″ drain valve.   Product Parameter Code No. WFBL- 2 Inlet 2 Nos.   2-1/2” Male Instantaneous Connector Complying to BS 336 Outlet 100mm Flange outlet Working Pressure 16 Bar Test pressure Hydrostatically tested   to 24,Non-return valve tested to 22.5 bar Flange size BS 4504 / BS10D TABLE D   Products Features Manufactured in accordance with BS 5041 : Part 3 : 1975. High quality casting finishes. 25 mm drain valve with blanking cap and chain. Vertical or horizontal mounting.
    read more

top

Online Now