2 5inch Indoorfire Hydrant

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

2-5inch-indoorfire-hydrant

View :

Grid View List View

Red Overground Hydrant Key Type A
Red Overground Hydrant Key Type A Overground hydrant key type A: internal triangular type A solid steel design for overground hydrant, protective coating (malleable casting) in red length approx. 43 cm Features: Type A For Overground hydrants Inner triangular type A Solid steel design Protective coating (malleable casting) in red Length: approx. 43 cm

Related Tags :
Overground Hydrant Key Hydrant Key Hydrant Key Type A
read more
Plastic Fire Hydrant Hose Nozzle
Plastic Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Plastic Fire Nozzle Hydrant Hose Nozzle Fire Hose Nozzle
read more
1.5 Inch Brass Fire Hydrant Hose Nozzle
1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Hydrant Hose Nozzle 1.5 inch Fire Nozzle Brass Fire Hose Nozzle
read more
Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe
Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe Fire standpipe is basically a fire hydrant inside a building. Firefighters connect hoses to the standpipe to access water used to fight a building fire. Standpipes connect to a building's main water supply through a series of smaller pipes. It is a simple outdoor fire hydrant to used with underground fire hydrant. Specification Standpipe shaft: Alu.alloy Standpipe base&head: Alu.alloy Gasket: Rubber Size: Inlet 2", Outlet 2" storz Working pressure: 10Bar

Related Tags :
Hydrant Standpipe Fire Hydrant Standpipe Aluminum Hydrant Standpipe Storz Hydrant Standpipe
read more
Single Outlet BS Aluminum Fire Hydrant Standpipe
Single Outlet BS Aluminum Fire Hydrant Standpipe Standpipes are available from Winner in a number of different types. They screw onto the outlet of the underground hydrant. Single outlet fire hydrant standpipes come with a swivel connection to a shaft.The standpipe has a 2.5” female URT inlet and a twist release 2.5”female instantaneous outlet 2.Product Parameter Model No SHS02 Inlet 2.5”female URT Outlet 2.5”Female instantaneous with plastic cap and chain 3.Products Features A.Standpipe shaft: aluminium alloy to BS 1474 B.standpipe base & Head:Aluminium alloy to BS1490

Related Tags :
BS Hydrant Standpipe Single Outlet Standpipe
read more
Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe
Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe 1.Product Introduction Standpipes are available in single or double outlet 65mm female instantaneous BS 336 and are connected to the shaft with a 65mm Male and Female Instantaneous (Double pull Release Type), or a swivel gland that will allow continuous rotation of the head through 360 deg. The head with an instantaneous connection may be removed but the swivel type is an integral part of the standpipe. Double outlet standpipe is supplied with a single 65mm male blank plug. 2.Product Parameter Model No SHS02 DHS Inlet 2.5" female URT 2.5" female BSRT Outlet 2.5" Female instantaneous with plastic cap and chain Double headed 21/2" Inst.Female with plastic cap and chain 3.Products Features A.Standpipe shaft:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 B.Standpipe Base and Head:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 C.Working Pressure:15 bar (217 psi) D.Test Pressure:22.5 bar (326 psi)

Related Tags :
Double Outlet Standpipe
read more
Adjustable Fire Hydrant Wrench
Feature of adjustable spanners 1.Corrosion resistant plating 2.Strong, forged steel construction 3.Fit pentagon or square nuts SPECIFICATIONS Adjustable Yes Color Silver Length [In] 20.0 Manufacturer Warranty REED Warranty Maximum Opening (In) 1.75 Maximum Pipe / Tube Diameter (In) 1.75 Minimum Pipe / Tube Diameter (In) 0.25 Set / Individual Individual Width (In) 3.0 Wrench Size 19.5 In. long x 3 In. wide x 1 In. high Wrench Material forged steel Wrench Style Adjustable Wrench Type hydrant

Related Tags :
Adjustable Fire Hydrant Wrench Adjustable Fire Hydrant Wrench Tool Adjustable Fire Hydrant Spanner Fire Hydrant Wrench Company carbon steel fire hydrant wrench high quality f wrench for fire hydrant valve
read more
Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
Fire Hydrant Water Splitter Wye Fire Hose Ball Valve 1. Product introduction Our ball valve wyes are designed to divide one stream of water into two, similar to our plain wyes. They’re also equipped with a female swivel inlet and two rigid male outlets. However, the ball valve wye’s ¼ turn handles give the user the ability to shut off water to either outlet. 2. Product Parameter Item No. Inlet Outlet FHS2515 2½” F Swivel NH 2X1.5” M NH FHS2515 - 2 2½” F Swivel NST 2x1.5” M NST 3. Products Features a.Material: Aluminum alloy b.Inlet and outlet connection to threaded couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request

Related Tags :
Hydrant Wye Valve Fire Hose Ball Valve Water Splitter Wye
read more
1.5inch x 100ft 38mm x 30m Forestry Fire Hose

Related Tags :
Forestry Fire Hose 1.5 Inch Fire Hose 1.5inch Forestry Hose Forestry Hose 30m fire hose 100ft fire hose
read more
1.5inch x 100ft 38mm x 30m Forestry Fire Hose
1.5inch x 100ft 38mm x 30m Forestry Fire Hose Durable exterior jacket woven from 100% ring-spun polyester yarn with a single-ply extruded tube liner made of synthetic rubber or synthetic polyurethane to resist ozone. The use of thin lining is designed to increase packing ability for forestry fire fighting and applications where a lightweight fire hose is desired. Applications Forest firefighting Brush firefighting Grass firefighting Wildland firefighting Light Industrial Use Test Ratings (Water Only With Expansion Ring Couplings) Service Pressure (A 3-minute hydrostatic test conducted by users on in-service hose to determine suitability for continued service) Proof Test Pressure (A pressure equal to a least two times the service test pressure) PSI Burst Test Pressure

Related Tags :
38mm fire hose
read more
Overhead Surface Hydrant Key Type B
Overhead Surface Hydrant Key Type B The Universal Surface Hydrant key is used to open several types of surface hydrants. It is made of cast iron and can be red or black in color. It can be used by firefighters and utilities. Features: Type B For Overground hydrants Solid cast iron design Protective coating (malleable casting) in red

Related Tags :
Overhead Hydrant Key Hydrant Key Type B
read more

first page
<< 1 2
last page

A total of

pages