PVC Line Fire Hose
overground-hydrant-key

  • Overground Hydrant Key
    Red Overground Hydrant Key Type A
    Red Overground Hydrant Key Type A Overground hydrant key type A: internal triangular type A solid steel design for overground hydrant, protective coating (malleable casting) in red length approx. 43 cm   Features: Type A For Overground hydrants Inner triangular type A Solid steel design Protective coating (malleable casting) in red Length: approx. 43 cm 
    read more
  • Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Brass Fire Hose Nozzle
    1.5 Inch Brass Fire Hydrant Hose Nozzle
    1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Storz Hydrant Standpipe
    Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe
    Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe   Fire standpipe is basically a fire hydrant inside a building. Firefighters connect hoses to the standpipe to access water used to fight a building fire. Standpipes connect to a building's main water supply through a series of smaller pipes. It is a simple outdoor fire hydrant to used with underground fire hydrant.   Specification Standpipe shaft: Alu.alloy  Standpipe base&head: Alu.alloy Gasket: Rubber  Size: Inlet 2", Outlet 2" storz Working pressure: 10Bar
    read more
  • Single Outlet Standpipe
    Single Outlet BS Aluminum Fire Hydrant Standpipe
    Single Outlet BS Aluminum Fire Hydrant Standpipe   Standpipes are available from Winner in a number of different types. They screw onto the outlet of the underground hydrant.   Single outlet fire hydrant standpipes come with a swivel connection to a shaft.The standpipe has a 2.5” female URT inlet and a twist release 2.5”female instantaneous outlet     2.Product Parameter Model No SHS02 Inlet 2.5”female URT Outlet 2.5”Female instantaneous with plastic cap and chain   3.Products Features A.Standpipe shaft: aluminium alloy to BS 1474 B.standpipe base & Head:Aluminium alloy to BS1490
    read more
  • Double Outlet Standpipe
    Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe
    Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe   1.Product Introduction  Standpipes are available in single or double outlet 65mm female instantaneous BS 336 and are connected to the shaft with a 65mm Male and Female Instantaneous (Double pull Release Type), or a swivel gland that will allow continuous rotation of the head through 360 deg.   The head with an instantaneous connection may be removed but the swivel type is an integral part of the standpipe. Double outlet standpipe is supplied with a single 65mm male blank plug.   2.Product Parameter  Model No SHS02 DHS Inlet 2.5" female URT 2.5" female BSRT Outlet 2.5" Female instantaneous with plastic cap and chain Double headed 21/2" Inst.Female with plastic cap and chain   3.Products Features A.Standpipe shaft:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 B.Standpipe Base and Head:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 C.Working Pressure:15 bar (217 psi) D.Test Pressure:22.5 bar (326 psi)

    Related Tags :

    Double Outlet Standpipe
    read more
  • Wholesale best Adjustable Fire Hydrant Wrench
    Adjustable Fire Hydrant Wrench
    Feature of adjustable spanners 1.Corrosion resistant plating 2.Strong, forged steel construction 3.Fit pentagon or square nuts SPECIFICATIONS Adjustable Yes Color Silver Length [In] 20.0 Manufacturer Warranty REED Warranty Maximum Opening (In) 1.75 Maximum Pipe / Tube Diameter (In) 1.75 Minimum Pipe / Tube Diameter (In) 0.25 Set / Individual Individual Width (In) 3.0 Wrench Size 19.5 In. long x 3 In. wide x 1 In. high Wrench Material forged steel Wrench Style Adjustable Wrench Type hydrant
    read more
  • Hydrant Wye Valve
    Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
    Fire Hydrant Water Splitter Wye Fire Hose Ball Valve 1. Product introduction Our ball valve wyes are designed to divide one stream of water into two, similar to our plain wyes. They’re also equipped with a female swivel inlet and two rigid male outlets. However, the ball valve wye’s ¼ turn handles give the user the ability to shut off water to either outlet.   2. Product Parameter Item No. Inlet Outlet FHS2515 2½” F Swivel NH 2X1.5” M NH FHS2515 - 2 2½” F Swivel NST 2x1.5” M NST   3. Products Features a.Material: Aluminum alloy b.Inlet and outlet connection to threaded couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request
    read more
  • Hydrant Key
    Overhead Surface Hydrant Key Type B
    Overhead Surface Hydrant Key Type B The Universal Surface Hydrant key is used to open several types of surface hydrants. It is made of cast iron and can be red or black in color. It can be used by firefighters and utilities.   Features: Type B For Overground hydrants Solid cast iron design Protective coating (malleable casting) in red
    read more
  • Right Angle Valve
    Brass Right Angle Fire Hydrant Hose Valve
    Brass Right Angle Fire Hydrant Hose Valve  Angle hose valves are designed for use with a fire hose rack assembly, or, as a fire department outlet connection. Available in 1 1/2" and 2 1/2" varieties. • 300 PSI working pressure • Technical: Forged • Special threaded outlets available upon request Name Right Angle Hose Valve Body Material Brass Handwheel Material Aluminum Size 1.5" / 2.5" Inlet Female NPT Outlet NPT / NH Packing  Carton & Pallet Original Made In China
    read more
  • Lock Shield Valve
    DN25 Brass Fire Hose Reel Valve 1" Lock Shield Gate Valve with Key
    DN25 Brass Fire Hose Reel Valve 1" Lock Shield Gate Valve with Key Lock shield valves are used to prevent unauthorized operation of the installed Fire Hose Reels. It is installed at the inlet pipe of Hose Reel and can be opened by only key.   A smaller sized pressure reducing valve is used to reduce system pressure to required operating of Fire Hose Reel.   Name Lock Shield Valve Body Material Brass Size 1" Inlet Female BSP Outlet Female BSP Packing  Carton & Pallet Original Made In China
    read more
  • Fire Equipments Box
    Fire Equipments Box Fire Hose Stand Hydrant Support Equipment Fire Hydrant Booths
    Fire Equipments Box Fire Hose Stand Hydrant Support Equipment Fire Hydrant Booths   These booths are designed to shelter the hydrant accessories. They are usually used in areas of high humidity or with difficult climates. Weatherproof fiberglass box with pedestal for storing fire hoses outdoors. Made of fiberglass without accessories.  Dimensions Overall Height: 1500mm Box: 650x460x500   OPTIONAL: Accessories characteristics: -1 hose 70mmx15m -2 hose sections 45mmx15m -1 siamese 70x45x45mm -1 plastic nozzle 70mm -2 plastic nozzle 45mm -1 reduction 70x45mm
    read more

top

Online Now