Tr Ch A Ch Y 2 C A

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

tr-ch-a-ch-y-2-c-a

View :

Grid View List View

Manual Operated Ductile Iron 4 Inch Butterfly Valve DN200
Manual Operated Ductile Iron 4 Inch Butterfly Valve DN200 Butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates. Products Features Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they cost less than other valve designs, and are lighter weight so they need less support. The disc is positioned in the center of the pipe. A rod passes through the disc to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Product Parameter Model A C D ZSXF-50-D(G) 90 55 60.3 ZSXF-65-D(G) 90 65 76.1 ZSXF-80-D(G) 100 70 88.9 ZSXF-100-D(G) 110 87 114.3 ZSXF-125-D(G) 110 100 139.7 ZSXF-150-D(G) 110 115 165.1 ZSXF-200-D(G) 134 150 219.1

Related Tags :
Butterfly Valve 4 Inch Butterfly Valve Butterfly Valve DN200
read more
Gear Operated Concentric Wafer Fire Signal Butterfly Valve
Gear Operated Concentric Wafer Fire Signal Butterfly Valve The signal butterfly valve is one of the important accessories in the pipeline of a fire sprinkler system. Its structure is Groove type. As the control valve of the fire sprinkler system, it has the function of transmitting the valve's opening and closing state to the control department to trace the misoperation and improve the safety of the system. On top of the valve has a signal device connect with stem directly. Under working condition when the valve is mistakenly closed by 25% (1/4 of full opening), the signal device will output a signal to the fire control center. So that relevant personnel can check the situation in time. The signal butterfly valve can intuitive, clear and reliable reflect the working status of the pipeline system, so widely used in firefighting systems. Products Features 1) Small and lightweight, easy to disassemble and repair, and can be installed at any position. 2) The structure is simple and compact, 90° rotation open and close quickly. 3) The operating torque is small, labor-saving and light. 4) Complete sealing, water test leakage is zero. 5) Can be applied to a variety of medium. 6) The flow characteristics tend to be straight and the adjustment performance is good. 7) The number of opening and closing tests is up to 10,000 times, the service life is long. 8) Pipes that use gate valves, check valves (spherical shut-off valves), globe valves, plug valves, hose valves, and diaphragm valves, especially in high-rise building fire protection systems and pipeline systems that require showing the valve switching status. This valve can be a good alternative. Product Parameter Model A B C D NXQ ZSXF-50-D 46 265 68 125 4X18 ZSXF-65-D 48 275 78 145 4X18 ZSXF-80-D 50 285 90 160 4X18 ZSXF-100-D 56 300 108 180 4X18 ZSXF-125-D 58 315 120 210 4X18 ZSXF-150-D 60 330 130 240 4X22 ZSXF-200-D 65 380 162 295 4X22

Related Tags :
Signal Butterfly Valve Wafer Signal Butterfly Valve Concentric Signal Butterfly Valve
read more
Single Eccentric Disc-Shaft Resilient Seated Fire Butterfly Valve
Single Eccentric Disc-Shaft Resilient Seated Fire Butterfly Valve Butterfly valve is a valve that isolates or regulates the flow of a fluid. The closing mechanism is a disk that rotates. Products Features Operation is similar to that of a ball valve, which allows for quick shut off. Butterfly valves are generally favored because they cost less than other valve designs, and are lighter weight so they need less support. The disc is positioned in the center of the pipe. A rod passes through the disc to an actuator on the outside of the valve. Rotating the actuator turns the disc either parallel or perpendicular to the flow. Product Parameter

Related Tags :
Fire Butterfly Valve Resilient Seated Butterfly Valve Eccentric Disc-Shaft Butterfly Valve
read more
Quick Connect External Lug Forestry Expansion Ring Couplings
Quick Connect External Lug Forestry Expansion Ring Couplings Quick Connect Forestry Couplings are Hardcoat Anodised with no dyes or colouring used. Hardcoat is a hard, dense coating formed by converting the surface of the aluminium alloy into a hard aluminium oxide. This process provides the completed part with a hardened surface that resists corrosion and abrasion, and reduces electrolysis. The result – reliability and performance when you need it most. Sizes: 1½″ connecting face for either 1″ or 1½” forestry hose Features: Made from aluminium forgings External lugs for faster action in the field where quick connection counts. No threads to damage, hang up or seize. Complete reliability in demanding situations. Related product to Aluminum Russian Gost type fire hose coupling We serve customers for over 30 years — so we’ve got the knowledge and industry experience to help you get it right. If you would like to know more fire hose, just click fire hose coupling. or Send inquiry now.

Related Tags :
Forestry Expansion Ring Couplings Forestry Couplings Quick Connect Forestry Couplings
read more
1.5 Inch Brass Hydrant Valve Machino
1.5 Inch Brass Hydrant Valve Machino Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment . Type: Fire Valve Machino Model: WFHV - M15 Material: Brass Inlet interface: 1.5 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Name Indoor fire hydrant Body Material Brass Valve Rod Material Brass Size 1.5" Packing Carton with pallet Delivery time 15-30 days OEM Avaliable Original Made In China

Related Tags :
Brass Hydrant Valve 1.5 Inch Hydrant Valve Hydrant Valve Machino 1.5 Inch Valve
read more
Forged Y Siamese Water Divider Straight Fire Department Connection
Forged Y Siamese Water Divider Straight Fire Department Connection Fire department connection is one of the most important and convenient allies for firefighters on-site. Because of this, there are several requirements in place to guarantee its accessibility. One of them has to do with the distance between a building’s fire hydrant and its Siamese connection. The two Siamese couplings connect servicing hoses that pump water from fire engines. • Single clapper / double clapper designs • Technical: Forged • 2 1/2” swivels ring are pin lug design for ease of use and compatibility with local fire service districts. • Including 2 plug of U.S.A. 2.5" NST polished with chain and plate for fire department. Code No. Inlet size Outlet size WF - FDC01 F 4”BSP 2xF2.5”NST WF - FDC01A F 4”NPT 2xF2.5”NST

Related Tags :
Fire Department Connection Straight Fire Department Connection Siamese Water Divider
read more
2 inch 52mm Plastic Straight Fire Nozzle
2 inch 52mm Plastic Straight Fire Nozzle 1.Product Introduction Straight fire nozzle,its inlet connection is 2” storz and outlet is straight stream nozzle.Material of construction is aluminum alloy and plastic. 2.Product Parameter Material Aluminum & Plastic Size 25mm / 50mm / 65mm Working pressure 8 Bar Discharge pattern Solid uniform Jet Pattern 3.Products Features Its operating pressure is 116 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach.

Related Tags :
Straight Fire Nozzle Plastic Straight Fire Nozzle 2 inch Fire Nozzle
read more
Heavy Duty Adjustable Fire Hydrant Wrench
Heavy Duty Adjustable Fire Hydrant Wrench It is used to open or close a hydrant by rotating the valve stem, and to remove the caps from the hydrant. Works both a pin and rocker lug. Features: For pentagon hydrant nuts up to 1 3/4 in. from point to flat Notched to fit 1 1/4 in. square hydrant nut Spanner for pin lug and rocker lug couplings 1 1/2 in. thru 6 in. Plated iron head with 7/8 in. plated steel handle Overall length 18 in.

Related Tags :
Fire Hydrant Wrench Adjustable Fire Hydrant Wrench Hydrant Wrench
read more
Red ABC Spanner Wrench for Storz Coupling
ABC Red Fire Hose Coupling Universal Spanner Wrench It is used to tighten and release fire Storz couplings on pipes, hydrants and pumps. Used to unlock and lock fire couplings C Ø52, B Ø75 and A Ø110. Features: - Constructed of cast iron - Standard color is Silver Standard is Silver, or we can supply any of these wrench powder coated Red Powder coat is a polymer resin based dry finish that is a durable non-conductive coating to help inhibit electrolysis.

Related Tags :
ABC Wrench ABC Spanner Wrench Storz Coupling Wrench Wrench for Storz Coupling Spanner for Storz Coupling
read more
Aluminum Collecting Breeching A/2B
Aluminum Collecting Breeching A/2B The Collecting Breechings are designed to supply water from two separate feed hoses of the same size into one larger drainage hose. It is equipped with a non-return valve that serves to break one supply line in case of pressure drop. Contains one Ø 110 (A) coupling on one side and two Ø 75 (B) couplings on the other. Made of light alloy and provided with two Storz B couplings on the inlets. Outlet fitted with Storz A coupling. Product Parameter Code No. B100 Inlet 2 Nos. 2-1/2” Storz Connector or as request Outlet 4" Storz Connector or as request Working Pressure 16 Bar Test pressure Hydrostatically tested to 24

Related Tags :
Collecting Breeching Aluminum Collecting Breeching Collecting Breeching A/2B
read more
Stainless Steel Electric Remote Control Fire Water Monitor For Fire Fighting
Stainless Steel Electric Remote Control Fire Water Monitor For Fire Fighting The remote control fire monitor was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features 1) SS304 Stainless Steel construction; 2) Constant or Selectable nozzle ; 3) Vertical swing range: -90° to +90° ; 4) Horizontal rotation :360° ; 5) Electric control jetting Pattern: Straight stream,Fog; 6) Electric driver and control unit box are waterproof; 7) Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model Number PSKDS 5 PSKDS 10 Flow Rate 5LPS / 300 LPM / 80GPM 10LPS/ 600 LPM / 160 GPM Working Pressure 8 Bar Max Reach 40 m 45 m Max Fog Angle 120° Max Range of Motion 360°horizontal rotation,-55°/+90°vertical elevate (adjustable) Turning Speed 24°/second rotation, 10°/second vertical Power Supply DC 24V Power Consumption 24V @ 7.5A Waterway Size 2"(50mm) 2"(50mm) Monitor Outlet 2"(50mm) Monitor Inlet Flange 2.5" ANSI 150# is standard,other size and standard available Material Monitor - SS304 stainless steel (SS316 upon request) Nozzle - Hard coated anodized aluminium alloy

Related Tags :
Electric Monitor Fire Water Monitor Remote Control Fire Monitor
read more
Remote Control Fire Fighting Water Cannon For Fire Vehicle
Remote Control Fire Fighting Water Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +90°, - 55° ● Power supply 12V/24V DC(optional),or 100-230 V AC Parameters: Model PSKD20-40 Flow Range 20-30-40LPS / 1200-1800-2400 LPM / 320GPM-630GPM, Selectable Working Pressure 6 bar~ 8 bar Max Reach @ Max Flow 60 meters Range of motion -90°~+90° Vert,360° Rotation Max fog angle 120° Turning speed 18 degrees/sec Material (body) 304L Stainless Steel(Standard) 316L Stainless Steel (optional) Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply DC 24V(Standard) DC 12V(Optional) AC100-230V (Optional) Power Consumption normal/Max 50W/150W Weight incl. nozzle appox 20kg Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Pump requirement for minimum performance 40L/S@ 6 bar Pipe dimensions for installation 2-2.5 Inch Monitor Inlet 3” or 4" flange Monitor Outlet 2.5 inch NH Water way size 2.5 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ● Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs

Related Tags :
Water Cannon Fire Fighting Water Cannon Remote Control Water Cannon
read more
Electric Remote Control Fire Water Cannon for Fire Fighting
Electric Remote Control Fire Fighting Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +85°, - 55° ●AC 380V power supply Parameters: Model PSKD150 PSKD180 PSKD180 Flow Range 150 L/S (2375 GPM) 180 L/S (2850 GPM) 200 L/S (3170 GPM) Working Pressure 10 bar 10 bar 10 bar Max Reach @ Max Flow 105 m 110 m 115 m Range of motion -50°~+85° Vert,360° Rotation Max fog angle 120° Turning speed 7 degrees/sec Material (body) 304L Stainless Steel standard （316L Stainless Steel is also available） Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply AC 380V Power Consumption normal/Max 50W/300W Weight incl. nozzle appox 55 KG Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Pipe dimensions for installation 6 Inch Monitor Inlet 6” flange Monitor Outlet 4 inch (100mm) Water way size 4 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ●Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs

Related Tags :
Fire Water Cannon Water Cannon for Fire Fighting
read more
Manul Fire Control Foam Fire Monitor For Fire Fighting
Manul Fire Control Foam Fire Monitor For Fire Fighting The Foam/Water Monitor are highly manoeuvrable and easy to operate while delivering much more foam or water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features * Simple to operate * Foam/Water Nozzle * Easy to service and repair. * Hard coated anodized aluminium alloy Construction Parameters: Model PLZ24 PLZ32 PLZ40 PLZ48 PLZ64 Flow Rate 24LPS 32LPS 40LPS 48LPS 64LPS Working Pressure 10 bar 10 bar 10 bar 10 bar 10 bar Foam Jetting Range 40 Meter 45 Meter 50 Meter 55 Meter 60 Meter Water Jetting Range 45 Meter 50 Meter 55 Meter 60 Meter 65 Meter Foam Expansion >= 6 times >= 6 times >= 6 times >= 6 times >= 6 times Rotation Horizontally 360° 360° 360° 360° 360° Elevate Vertically -45° to 85° -45° to 85° -45° to 85° -45° to 85° -45° to 85° Inlet DN100(4") DN100(4") DN100(4") DN100(4") DN100(4") Outlet 2.5"NH 2.5"NH 2.5"NH 2.5"NH 2.5"NH Flange Standard BS4504,ANSI150,GB,etc Order Information 1) Specify Adaptor 2) Specify Size 3) Additional Notes
read more
20-30-40LPS Fire Truck Water Cannon
20-30-40LPS Fire Truck Water Cannon Fire water cannons are highly manoeuvrable and easy to operate while delivering much more water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features * Simple to operate * Adjustable Nozzle * Easy to service and repair. * Aluminium alloy Construction Key Users * Fire & Rescue Services * Oil & Gas * Petrochemicals * Fuel Storage Sites * Major Industrials * Aviation Product Parameter Material Body Aluminum Alloy Nozzle Aluminum Alloy Tiller Stainless Steel 304 Flow Range 1200-1800-2400 LPM Adjustable Nozzle Max.Fog Angle 120° Jetting Range@10 bar 60 meters@2400LPM Working Pressuce 10 bar Max Range Of Monitor -45° to +85° Vertically, 360° Rotation Water Way Size 2.5" Outlet 2.5" NH Inlet Flange 4” BS4504 is standard,other standard flange is available

Related Tags :
Fire Truck Water Cannon Fire Truck Cannon
read more
1.5 Inch Brass Fire Hydrant Hose Nozzle
1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Hydrant Hose Nozzle 1.5 inch Fire Nozzle Brass Fire Hose Nozzle
read more

first page
<< 1 2 3 4 5 6 7 8 >>
last page

A total of

pages