Keep your firehose operating correctly with the right fire hose nozzles from Winner. We offer firefighters a wide range of fire nozzle options. Straight stream to wide fog—or perhaps an adjustable fire nozzle ...
-
Aluminum Gost 2 inch Fire Hose Nozzle
Aluminum Gost 2 inch Fire Hose Nozzle
1.Product introduction
Gost fire hose nozzle is a fire extinguishing device connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.
2.Product Parameter
Material
Aluminum
Size
51mm / 66mm
Working pressure
16 Bar
Test pressure
24 Bar
Discharge pattern
Solid uniform Jet Pattern
inquiry now
read more
-
Fire Protection Water Jet Machino Hose Nozzle
Fire Protection Water Jet Machino Hose Nozzle
1. Product Introduction
Machino Hose Nozzles feature solid stream jetting water and are widely demanded in fire brigades as the primary firefighting nozzle. It is offered in different metals as per the requirements. This long fire nozzle made of lightweight aluminum alloy suits the general flow and operational needs.
2. Product Parameter
Material
Aluminum Alloy
Size
1.5 / 2.5 Inch
Working pressure
16 Bar
Discharge pattern
Jet
inquiry now
read more
-
DC Jetting Direct Stream Fire Nozzle Shut Off
DC Jetting Direct Stream Fire Nozzle Shut Off
1.Product Introduction
Fire nozzle shut off is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water and easy shut off with single lever.
2.Product Parameter
Material
Aluminum Alloy
Size
2"
Working pressure
25 Bar
Test pressure
37.5 Bar
Discharge pattern
Direct Stream
Rated DC Flow Rate
7.5L/S
Jet Distance
≥ 28M
inquiry now
read more
-
Brass Marine Straight Stream Fire Fighting Hose Nozzle
Brass Marine Straight Stream Fire Fighting Hose Nozzle
1.Product Description
Straight stream nozzle shapes and directs water for fire application. Solid jet keeps working from a safe distance. It is usually made of brass or aluminum.It is one of important and indispensable water jetting tool for fire fighting equipment.
Technical Parameters:
Material
Brass
Size
1.5" / 2" / 2.5"
Working pressure
16 Bar
Discharge pattern
Stream
Couplings
Storz, Machino, Instaneous, NH, Gost, Nakajima etc.
3.Products Features
A.Its operating pressure is 230 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach.
B.This nozzle is available with two orifice sizes:12mm and 19mm
C.Application:hydrant system,wet or dry riser system
inquiry now
read more
-
2.5 inch John Morris Instaneous Fire Fighting Branch Pipe
2.5 inch John Morris Instaneous Fire Fighting Branch Pipe
1.Product Description
Branch pipe,its inlet connection is 21/2” male instantaneous and outlet is Solid Jet nozzle.Material of construction maybe copper alloy or aluminum alloy.
2.Product Parameter
Material
Brass
Aluminum
Size
65mm
Working pressure
16 Bar
Test pressure
24 Bar
Discharge pattern
Solid uniform Jet Pattern
3.Products Features
A.Its operating pressure is 150 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach.
B.This nozzle is available with two orifice sizes:12mm and 19mm
C.Application:hydrant system,wet or dry riser system
inquiry now
read more
-
2.5 Inch Portable Inline Foam Eductor
2.5 Inch Portable Inline Foam Eductor
1.Product Description
The foam eductors are designed to feed foam concentrates at a set mixing rate into the hose line. Inductors are placed in the delivery line between the pump and the foam nozzle and can be used for medium and heavy foam nozzles.
Eductors are available in 60, 95, or 125 gpm models and have a metering head with easy-read knob for use with Class A foam at 0.25% and 0.5% and with ARC-AFFF foam at 1%, 3% and 6% .
2.Product Parameter
Body Material
Hard Anodized Aluminum
Foam Solution Ratio
0.25%,0.5%,1%,3%,6% ,adjustable
Coupling
Storz,John Morris,Gost,Machino,etc
Model Number
Flow Rate in GPM
Flow Rate in LPS
Connecting Size
Working Pressure
PHF/4
60 GPM
4 L/S
1.5 inch or 2.5 inch
4-10bar (58-145 PSI)
PHF/6
95GPM
6 L/S
1.5 inch or 2.5 inch
4-10bar (58-145 PSI)
PHF/8
125GPM
8 L/S
1.5 inch or 2.5 inch
4-10bar (58-145 PSI)
3.Product Features
Mainly equipped with firefighting forces and professional firefighting teams to extinguish various fire scenes
Aluminum Alloy Construction is a new type of material, T5 Hear Treatment and Anodic Oxidation anticorrosion treatment which allows the longer service life.
Rotated 360 degree to avoid hose knotting
Easy to correct water hose position to prevent blocking water flow
inquiry now
read more
-
2.5 Inch Fixed Inline Foam Inductor
2.5 inch Fixed Inline Foam Inductor
1.Product Description
Inline foam inductor is used to induct the foam liquid concentrate in water stream to supply proportioned solution of the liquid concentrate and water,to the foam producing equipment.The inductors are designed primarily for use in the fixed foam installation to provide a simple and reliable method of proportioning in constant flow applications.
Inductor is designed for a pre-determined water pressure to give the correct proportioning at that pressure and discharge rate.The increase or decrease of the inlet pressure will result in an increase or decrease in the flow rate,which in ture will change the proportioning.
2.Product Parameter
Operating pressure
6.5-12 Bar(93-175PSI)
Induction
1%-6%
Maximum back pressure
65% of the inlet pressure
Norminal size
65,80,100
Finish
Red RAL3000
3.Products Features
A.Foam concentrate is drawn through a pick up tube at a preset foam concentrate amount and is added into the water stream
B.Body material:Aluminium Alloy and copper alloy
C.Filters:Stainless Steel
D.Foam concentrate rate adjustable foam 1% to 6%,Flexible foam concentrate suction hose
E.Inlet and outlet connection BS336 Insttantaneous (other adaptors are upon request)
inquiry now
read more
-
Brass Fire Hose Diffuser 3 Position Fire Nozzle
Brass Fire Hose Diffuser 3 Position Fire Nozzle
1.Product introduction
3-Position Fire Nozzle combine the pattern of straight stream and fog nozzles. The lever has three modles from shut-off to jet or spray. It is made of barss, corrosion resistant.
2.Product Parameter
Material
Brass
Size
1.5" / 2" / 2.5"
Working pressure
16 Bar
Discharge pattern
Shut/Stream / Spray
Couplings
Storz, Machino, Instaneous, NH, Gost, Nakajima etc.
3.Products Features
1,The nozzles are available with shut-off valve and to threaded onto branchpipes.
2, Chrome brass ball is commonly used in the shut-off valve. Three stage open-to-close is designed and clearly marked on body.
3, Sheet nozzle covers the watering span of 90°.
inquiry now
read more
-
Brass Fire Hose Fire Diffuser Nozzle
Brass Fire Hose Fire Diffuser Nozzle
1.Product introduction
A fire diffuser nozzle is a specific type of nozzle used by firefighters to douse the fire. Firefighters attach the diffuser nozzle to the end of a fire hose pipe which can be adjusted by hand to shape, regulate and direct the water flow or fire safety agents.
Winner Fire Diffuser Nozzle has the option of a fog pattern or a straight stream. It can improve surface cooling compared to the full jet. It is usually made of brass or aluminum.
2.Product Parameter
Material
Brass
Size
1.5" / 2" / 2.5"
Working pressure
16 Bar
Discharge pattern
Stream / Spray
3.Products Features
This diffuser nozzle has a rotating element that sets the splash mode. When the fighters rotate it to a single side the outlet produces a splash. When turning to the end, the vent produces a water veil that protects the person handling the nozzle from the heat of the fire.
inquiry now
read more
-
Brass Fire Hose Branch Pipe Fire Nozzle
Brass Fire Hose Branch Pipe Fire Nozzle
1.Product introduction
A branch pipe is a specific type of nozzle used by firefighters to douse the fire. Firefighters attach the branch pipe to the end of a fire hose pipe which can be adjusted by hand to shape, regulate and direct the water flow or fire safety agents.
Winner Branch Pipe Fire Nozzle has the option of a fog pattern or a straight stream. It can improve surface cooling compared to the full jet. It is usually made of brass or aluminum.
2.Product Parameter
Material
Brass
Size
1.5" / 2" / 2.5"
Working pressure
16 Bar
Discharge pattern
Stream / Spray
3.Products Features
This branch pipe nozzles has a rotating element that sets the splash mode. When the fighters rotate it to a single side the outlet produces a splash. When turning to the end, the vent produces a water veil that protects the person handling the nozzle from the heat of the fire.
inquiry now
read more
-
Spray Jet Brass Fire Fighting Hose Nozzle
Spray Jet Brass Fire Fighting Hose Nozzle
1.Product Introduction
This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water.
2.Product Parameter
Material
Brass Size
1.5 inch
Max working pressure
100 psi
Flow rate
80 GPM
Discharge pattern
Capable of complete shutoff, straight stream or any degree of conical fog
3. Product Feature
Made of solid brass. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
inquiry now
read more
-
1.5 Inch Brass Fire Hydrant Hose Nozzle
1.5 Inch Brass Fire Hydrant Hose Nozzle
1.Product Introduction
This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water.
2.Product Parameter
Material
brass
Size
1.5 inch
Max working pressure
100 psi
Discharge pattern
Capable of complete shutoff, straight stream or any degree of conical fog
3. Product Feature
Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
inquiry now
read more