fire hydrant is a connecting piece with valve installed on the fire control piping network in the buildings to supply water to fire scene. It is a kind of indoor fixed fire control unit equipped in the plants, warehouses, high-rise buildings and public buildings, as well as vessels, etc. , to fight fire in the buildings. It is normally installed inside the fire hydrant case to be used with fire control water band and water gun
-
Adjustable Fire Hydrant Wrench
Feature of adjustable spanners
1.Corrosion resistant plating
2.Strong, forged steel construction
3.Fit pentagon or square nuts
SPECIFICATIONS
Adjustable
Yes
Color
Silver
Length [In]
20.0
Manufacturer Warranty
REED Warranty
Maximum Opening (In)
1.75
Maximum Pipe / Tube Diameter (In)
1.75
Minimum Pipe / Tube Diameter (In)
0.25
Set / Individual
Individual
Width (In)
3.0
Wrench Size
19.5 In. long x 3 In. wide x 1 In. high
Wrench Material
forged steel
Wrench Style
Adjustable
Wrench Type
hydrant
inquiry now
read more
-
Red Overground Hydrant Key Type A
Red Overground Hydrant Key Type A
Overground hydrant key type A: internal triangular type A solid steel design for overground hydrant, protective coating (malleable casting) in red length approx. 43 cm
Features:
Type A For Overground hydrants
Inner triangular type A
Solid steel design
Protective coating (malleable casting) in red
Length: approx. 43 cm
inquiry now
read more
-
Heavy Duty Adjustable Fire Hydrant Wrench
Heavy Duty Adjustable Fire Hydrant Wrench
It is used to open or close a hydrant by rotating the valve stem, and to remove the caps from the hydrant.
Works both a pin and rocker lug.
Features:
For pentagon hydrant nuts up to 1 3/4 in. from point to flat
Notched to fit 1 1/4 in. square hydrant nut
Spanner for pin lug and rocker lug couplings 1 1/2 in. thru 6 in.
Plated iron head with 7/8 in. plated steel handle
Overall length 18 in.
inquiry now
read more
-
Type C Underground Hydrant Key with Hook
Type C Underground Hydrant Key with Hook
The underground hydrant key is used to open the covers of underground hydrates and the valves for opening water in underground hydrants.
Hydrant key for underground hydrant (s) that is manufactured from black enamelled heavy steel. Underground hydrant key of quality including well hook. Key for operating built-in fittings and for various valves and underground hydrants.
Specification
Length 110 cm
Including pit hook (cover crook)
Dimensions 32 × 32 × 1100 mm
Type C.
According to regulation DIN 3223
inquiry now
read more
-
1.5 Inch Brass Hydrant Valve Machino
1.5 Inch Brass Hydrant Valve Machino
Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .
Type: Fire Valve Machino
Model: WFHV - M15
Material: Brass
Inlet interface: 1.5 inch
Rated working pressure: 1.6 Mpa
For water and foam mixed liquid only
Name
Indoor fire hydrant
Body Material
Brass
Valve Rod Material
Brass
Size
1.5"
Packing
Carton with pallet
Delivery time
15-30 days
OEM
Avaliable
Original
Made In China
inquiry now
read more
-
DN45 Brass Fire Valve Barcelona with Pressure Gauge
DN45 Brass Fire Valve Barcelona with Pressure Gauge
Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .
Type: Fire Valve Barcelona
Model: WFHV - B45
Material: Brass
Inlet interface: 45 mm / 1.5 inch
Rated working pressure: 1.6 Mpa
For water and foam mixed liquid only
Standard: Manufacture and certified to DIN 14461
Name
Indoor fire hydrant
Body Material
Brass
Valve Rod Material
Brass
Size
DN45
Packing
Carton with pallet
Delivery time
15-30 days
OEM
Avaliable
Original
Made In China
inquiry now
read more
-
2 Inch Brass Oblique Fire Valve Storz
2 Inch Brass Oblique Fire Valve Storz
Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .
Type: Fire Valve Storz
Model: WFHV - B50
Material: Brass
Inlet interface: 50 mm / 2 inch
Rated working pressure: 1.6 Mpa
For water and foam mixed liquid only
Standard: Manufacture and certified to DIN 14461
Name
Indoor fire hydrant
Body Material
Brass
Valve Rod Material
Brass
Size
50mm
Packing
Carton with pallet
Delivery time
15-20 days
OEM
Avaliable
Original
Made In China
inquiry now
read more
-
Ductile Iron Fire Hydrant Valve for Vietnam Russia
Ductile Iron Fire Hydrant Valve for Vietnam Russia
Fire Hydrant Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship . normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .
Type: indoor fire hydrant
Model: WFHV - 50
Material: made of ductile material
Inlet interface: 50 mm-2 inch / 65mm - 2.5 inch
Intake type: cylindrical pipe female thread
Outlet type: cylindrical pipe male thread with duct buckle
Outlet Diameter: 50 mm / 2 inch
Rated working pressure: 1.6 Mpa
For water and foam mixed liquid only
Standard: certification: ISO9001 in accordance with GB3445 china national standard
inquiry now
read more
-
2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve
2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve
Landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply.
The landing valves are oblique type with threaded inlet and are manufactured with delivery hose connection and blank cap.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.
Technical Data
Valve Type
Oblique, Threaded Inlet
Pressure Rating
Low Pressure Valve
Nominal Size
DN 2 1/2"
Working Pressure
15 Bar Maximum
Test Pressure
Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar
Water Flow Rate
8.5 L/S @ 4 Bar Outlet Pressure
inquiry now
read more
-
2.5 Inch Straight Through Landing Valve
2.5 Inch Straight Through Landing Valve
Straight through landing valve is available in two types screw and flanged. There are suitable for installation on wet risers in a building or a hydrant, manufactured to comply to BS 5041 Part 1:1987 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.
Product Parameter
Code No.
WFLV - ST25
Body Material
Copper Alloy
Inlet
2.5”BSP male thread or flanged according to BS4504
Outlet
2.5”BS 336 Female coupling with plastic cap & chain
Pressure Rating
Low Pressure Valve
Test pressure
Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar
Water Flow Rate
8.5 L/S @ 4 Bar Outlet Pressure
Products Features
Body material : copper alloy
Hand wheel :grey cast iron
Blank cap material :copper alloy
The hand wheel is BLACK painted and body to RED
inquiry now
read more
-
2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
Oblique landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply.
The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.
The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.
Product Parameter
Code No.
WFLV - F25
Body Material
Copper Alloy
Inlet
2.5”BS4504
Outlet
2.5”BS 336 Female coupling with plastic cap & chain
Pressure Rating
Low Pressure Valve
Test pressure
Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar
Water Flow Rate
8.5 L/S @ 4 Bar Outlet Pressure
Products Features
Body material made of copper alloy to EN 1982
Hand wheel material made of grey cast iron to BS EN 1561
Blank cap material made of copper alloy to EN 1982
Possible to replace the gland seal when under pressure with the valve fully closed
Disc facing rubber is of replaceable type
Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use
The hand wheel is BLACK painted and body to RED
inquiry now
read more
-
2.5 Inch Pressure Regulating Landing Valve
2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
The landing valves are pressure reducing type designed to provide a range of outlet pressure (5 bar -8 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar. High quality with most favourable price.
Pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.
Code No.
Inlet
Outlet
WFLV - PR25
BS4504 PN16 65MM
2.5”BS336 INST.FEMALE
WFLV - PR25A
BS4504 PN16 80MM
2.5”BS336 INST.FEMALE
WFLV - PR25B
Male BSP Thread 65mm
2.5”BS336 INST.FEMALE
Valve type:Oblique flanged inlet
Pressure Rating:HP or LP
Nominal Size:DN65
Test pressure:valve seat test at 22bar,body test at 30bar
Flange drilling:BS4504
Product Features:
1. Suitable for inlet pressure up to 20bar
2.Reduced outlet static pressure can be set from 5 to 8bar
3.Outlet pressure remain constant with inlet pressure range from 7bar to 20bar
4. Pressure test to 30bar
5.Minimum Flowrate up to 1400L/M
6.Body : Copper Alloy to BS 1400
7.Handwheel : Grey Cast Iron to BS 1452
8.Inlet:Male 2.5"BSP
9.Outlet : Female instantaneous to BS 336 and other connections
inquiry now
read more