Keep your firehose operating correctly with the right fire hose nozzles from Winner. We offer firefighters a wide range of fire nozzle options. Straight stream to wide fog—or perhaps an adjustable fire nozzle ...
-
BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle
BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle
1.Product Introduction
Fire Hose Diffuser Nozzles are widely demanded in fire brigades as the basic firefighting nozzle. It is offered in in different metals as per the requirements. The short one can easily fit with a choice of nozzles to suit the flow and operational requirement.
2.Product Parameter
Material
Aluminum
Size
2.5 Inch
Working pressure
16 Bar
Discharge pattern
Jet Spray
3. Product Feature
Made of aluminum alloy material with rubber bumper. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
inquiry now
read more
-
Plastic Fire Hydrant Hose Nozzle
Plastic Fire Hydrant Hose Nozzle
1.Product Introduction
This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water.
2.Product Parameter
Material
Plastic
Size
1.5 inch
Max working pressure
100 psi
Flow rate
80 GPM
Discharge pattern
Capable of complete shutoff, straight stream or any degree of conical fog
3. Product Feature
Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
inquiry now
read more
-
2 inch 52mm Plastic Straight Fire Nozzle
2 inch 52mm Plastic Straight Fire Nozzle
1.Product Introduction
Straight fire nozzle,its inlet connection is 2” storz and outlet is straight stream nozzle.Material of construction is aluminum alloy and plastic.
2.Product Parameter
Material
Aluminum & Plastic
Size
25mm / 50mm / 65mm
Working pressure
8 Bar
Discharge pattern
Solid uniform Jet Pattern
3.Products Features
Its operating pressure is 116 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach.
inquiry now
read more
-
Lance Variomatic UNI 45 PVC Rotating Fire Nozzle
Lance Variomatic UNI 45 PVC Rotating Fire Nozzle
1.Product Introduction
This is a device used to supply water, provided with a nozzle with a suitable section and a unified connection.
The lance can also be equipped with a valve that allows the full jet, the split jet and the closure.
2.Product Parameter
Material
PVC
Size
45mm
Working pressure
16 Bar
Test pressure
24 Bar
Discharge pattern
Jet Spray
3. Product Feature
Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
inquiry now
read more
-
Lancia Frazionatrice UNI 45 Plastic Fire Hose Spray Nozzle
UNI 45 Plastic Fire Hose Spray Nozzle
1.Product Introduction
UNI 45 plastic fire spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.
2.Product Parameter
Material
Aluminum & Plastic
Size
45mm
Working pressure
16 Bar
Test pressure
24 Bar
Discharge pattern
Jet Spray
inquiry now
read more
-
Fire Protection Instaneous Jet Spray Fire Hose Branch Pipe Nozzle
Fire Protection Instaneous Jet Spray Fire Hose Branch Pipe Nozzle
1. Product Introduction
Fire Protection Jet Spray Nozzles are widely demanded in fire brigades as the primary firefighting nozzle. It is offered in different metals as per the requirements. This long fire nozzle made of light weight aluminum alloy suits the general flow and operational needs.
2. Product Parameter
Material
Aluminum Alloy
Size
2.5 Inch
Working pressure
16 Bar
Discharge pattern
Jet / Spray
inquiry now
read more
-
Fire Pistol Low Expansion Foam Nozzle
Fire Pistol Low Expansion Foam Nozzle
Winner low expansion foam nozzles are available in 240, 480, or 960 LPM @ 100 psi.
With a high-strength forged body, ball valve, small aluminum barrel, and a pistol-style handle, they are very light, compact, and well-balanced for operation. Winner foam nozzles are easy to hold and have an unrivaled foam quality, thanks to an excellent air suction system.
Main Features
· Mainly for firefighting forces for various fire and different fire challenges.
· Made of strong lightweight aluminum alloy, hard anodized surface treatment.
· 360-degree swivel,anti-hose knot
· Easy to open and close the water flow by the fastball valve switch
· Little recoil force.
· Ergonomic, anti-slip polyurethane pistol grip.
Specification
LOW EXPANSION FOAM BRANCH PIPE
Model
FP 4
FP 8
FP 16
Flow Rate
240 LPM
480 LPM
960 LPM
Working Pressure
7 bar
7 bar
7 bar
Jetting Range
24 m
28 m
32 m
Foam Expansion
≥5 times
25% drain time
≥120 seconds
Inlet Size
2.5"
Coupling standard
Storz, Instantaneous, GOST, NH,etc.
inquiry now
read more
-
UNI 45 Fire Fighting Spray Nozzle
UNI 45 Fire Fighting Spray Nozzle
1.Product Introduction
UNI 45 fire fighting spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.
2.Product Parameter
Material
Aluminum
Size
45mm
Working pressure
16 Bar
Test pressure
24 Bar
Discharge pattern
Jet Spray
inquiry now
read more
-
2.5 inch Machino Nozzle Jet and Spray Branch Pipe
2.5 inch Machino Nozzle Jet and Spray Branch Pipe
1.Product Description
Machino Nozzle Branch pipe,its inlet connection is 2 1/2” storz / male instantaneous / male machino and outlet is Solid Jet nozzle. Material of construction is aluminum alloy.
2.Product Parameter
Model Number
WFN - MBP25
Weight:
1.5 kg
Fire nozzle body Material
Aluminum
Fire Nozzle Bumper Material
Rubber
Coupling
Storz, Instaneous, Machino
Working Pressure
8 Bar
Max Reach @ Max Flow
40 m
Fire Nozzle Type
Branch Pipe
Spraying Type
Jet / Fog
3.Products Features
A. Its operating pressure is 8bar to 12bar jet and spray type with rubber handle,It is a basic fire fighting nozzle commonly used by most fire Brigades.
B. This nozzle is available with two orifice sizes:16mm or 19mm
C. Application:hydrant system,wet or dry riser system
inquiry now
read more
-
Fire Fighting Medium Expansion Foam Branchpipe
Fire Fighting Medium Expansion Foam Branchpipe
The Winner Medium Expansion Foam Branchpipes have been designed for excellent performance with all foam concentrate types, and are capable of producing large quantities of foam in situations requiring an abundance of rapid foam cover with low water usage.
All models offer a continuous stable medium expansion foam cover at low pressure right up to the maximum 6 bar. Compatible with the Variable In-Line Foam Inductor.
Main Features
1.this foam nozzle is made of aluminium alloy with ss304 stainless steel;
2.a handle on the nozzle is convenient to carry on,
3.the connection standards are GOST; STORZ; INST,etc,
4.we have two types, one type with a valve to control the flow, another without vavle.
If you need our help, please show us your demand and requirement.
Specification
PQZ SERIES MEDIUM EXPANSION FOAM NOZZLE
Model
FN-C
Flow
240/480/960 LPM
Working Pressure
8 bar
Jetting Range
12 m
Foam Expansion
≧20 times
Inlet Size
1.5"~3"
Coupling standard
Storz, Instantaneous, GOST, NH,etc.
Material
Aluminum Alloy + SS304
inquiry now
read more
-
Hydroshield Jumbo Fire Water Curtain Nozzle
Hydroshield Jumbo Fire Water Curtain Nozzle
1.Product Description
Winner Water Curtain nozzle is made of aluminum plate into a fan shape. It is suitable for petrochemical toxic gases and fire-fighting fires. Water curtain barriers are arranged to control the spread of smoke, reduce the temperature of fireworks, cover fires and save people.
2.Product Parameter
Model
WF-CN65
Max.Working Pressure
7 Bar
Inlet Size
2.5"
Flow Rate
1300 LPM -1600LPM
Coupling
BSP /Storz /NH /GOST /INST /Machino
Material
Aluminium Alloy
3.Products Features
1) suitable for petrochemical toxic gases and fire-fighting fire;
2) comfortable with Quick Attach fire hose;
3) Water curtain barriers are arranged to control the spread of smoke, reduce the temperature of fireworks, cover fires and save people
inquiry now
read more
-
Branchpipe Low Expansion Foam Making Nozzle
Branchpipe Low Expansion Foam Making Nozzle
Winner Foam Making Nozzles have been designed for excellent performance with all foam concentrate types, offer longer throw and superior cooling compared to the Medium Expansion Foam Branchpipes.
Main Features
Brass Construction.
Corrosion Resistant.
Long Throw Capability.
Lightweight.
Easy to Service & Repair.
Specification
Product name
Fire Making Nozzles
Body Material
Brass
Foam Branchpipe Material
SS304
Application
Fire Fighting Emergency Rescue
Color
Silver or Blue
Size
Customized Size
Working pressure
7 Bar
Max Reach
24M
Precipiation Time
>=120S
Coupling
NH, Gost, Storz, Others
inquiry now
read more
English
русский
español
