PVC Line Fire Hose
indoor-hydrant-valve

  • Fire Hydrant Wrench
    Heavy Duty Adjustable Fire Hydrant Wrench
    Heavy Duty Adjustable Fire Hydrant Wrench It is used to open or close a hydrant by rotating the valve stem, and to remove the caps from the hydrant. Works both a pin and rocker lug.    Features: For pentagon hydrant nuts up to 1 3/4 in. from point to flat Notched to fit 1 1/4 in. square hydrant nut Spanner for pin lug and rocker lug couplings 1 1/2 in. thru 6 in. Plated iron head with 7/8 in. plated steel handle Overall length 18 in.
    read more
  • Overground Hydrant Key
    Red Overground Hydrant Key Type A
    Red Overground Hydrant Key Type A Overground hydrant key type A: internal triangular type A solid steel design for overground hydrant, protective coating (malleable casting) in red length approx. 43 cm   Features: Type A For Overground hydrants Inner triangular type A Solid steel design Protective coating (malleable casting) in red Length: approx. 43 cm 
    read more
  • Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Brass Fire Hose Nozzle
    1.5 Inch Brass Fire Hydrant Hose Nozzle
    1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Suction Strainer
  • Wye Hose Valve
    Fire Fighting 3 Way Wye Hose Valve
    Fire Fighting 3 Way Wye Hose Valve Durable, lightweight wye hose valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi.    Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type 3 Way Wye Hose Valve DN65 DN65*3 Ball Valve DN80 DN65*3 DN80*3  
    read more
  • Fire Hose Ball Valve
    2 Way Wye Fire Hose Ball Valve
    2 Way Wye Fire Hose Ball Valve Durable, lightweight wye valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi.    Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type 2 Way Wye Valve DN65 DN65*2 Ball Valve DN80 DN65*2 DN80*2
    read more
  • Poppet Check Valve
  • Foot Valve Strainer
  • Storz Hydrant Standpipe
    Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe
    Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe   Fire standpipe is basically a fire hydrant inside a building. Firefighters connect hoses to the standpipe to access water used to fight a building fire. Standpipes connect to a building's main water supply through a series of smaller pipes. It is a simple outdoor fire hydrant to used with underground fire hydrant.   Specification Standpipe shaft: Alu.alloy  Standpipe base&head: Alu.alloy Gasket: Rubber  Size: Inlet 2", Outlet 2" storz Working pressure: 10Bar
    read more
  • Single Outlet Standpipe
    Single Outlet BS Aluminum Fire Hydrant Standpipe
    Single Outlet BS Aluminum Fire Hydrant Standpipe   Standpipes are available from Winner in a number of different types. They screw onto the outlet of the underground hydrant.   Single outlet fire hydrant standpipes come with a swivel connection to a shaft.The standpipe has a 2.5” female URT inlet and a twist release 2.5”female instantaneous outlet     2.Product Parameter Model No SHS02 Inlet 2.5”female URT Outlet 2.5”Female instantaneous with plastic cap and chain   3.Products Features A.Standpipe shaft: aluminium alloy to BS 1474 B.standpipe base & Head:Aluminium alloy to BS1490
    read more
  • Double Outlet Standpipe
    Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe
    Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe   1.Product Introduction  Standpipes are available in single or double outlet 65mm female instantaneous BS 336 and are connected to the shaft with a 65mm Male and Female Instantaneous (Double pull Release Type), or a swivel gland that will allow continuous rotation of the head through 360 deg.   The head with an instantaneous connection may be removed but the swivel type is an integral part of the standpipe. Double outlet standpipe is supplied with a single 65mm male blank plug.   2.Product Parameter  Model No SHS02 DHS Inlet 2.5" female URT 2.5" female BSRT Outlet 2.5" Female instantaneous with plastic cap and chain Double headed 21/2" Inst.Female with plastic cap and chain   3.Products Features A.Standpipe shaft:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 B.Standpipe Base and Head:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 C.Working Pressure:15 bar (217 psi) D.Test Pressure:22.5 bar (326 psi)

    Related Tags :

    Double Outlet Standpipe
    read more
  • Wholesale best Adjustable Fire Hydrant Wrench
    Adjustable Fire Hydrant Wrench
    Feature of adjustable spanners 1.Corrosion resistant plating 2.Strong, forged steel construction 3.Fit pentagon or square nuts SPECIFICATIONS Adjustable Yes Color Silver Length [In] 20.0 Manufacturer Warranty REED Warranty Maximum Opening (In) 1.75 Maximum Pipe / Tube Diameter (In) 1.75 Minimum Pipe / Tube Diameter (In) 0.25 Set / Individual Individual Width (In) 3.0 Wrench Size 19.5 In. long x 3 In. wide x 1 In. high Wrench Material forged steel Wrench Style Adjustable Wrench Type hydrant
    read more
  • Hydrant Wye Valve
    Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
    Fire Hydrant Water Splitter Wye Fire Hose Ball Valve 1. Product introduction Our ball valve wyes are designed to divide one stream of water into two, similar to our plain wyes. They’re also equipped with a female swivel inlet and two rigid male outlets. However, the ball valve wye’s ¼ turn handles give the user the ability to shut off water to either outlet.   2. Product Parameter Item No. Inlet Outlet FHS2515 2½” F Swivel NH 2X1.5” M NH FHS2515 - 2 2½” F Swivel NST 2x1.5” M NST   3. Products Features a.Material: Aluminum alloy b.Inlet and outlet connection to threaded couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request
    read more
  • Gooseneck Shut Off Valve
    Gooseneck Garden Hose Connector Angle Brass Shut Off Valve
    Gooseneck Garden Hose Connector Angle Brass Shut Off Valve 45-degree garden hose shut-off valve is made of solid brass. It can be put on a ball shut off and controlled without shutting down the hose lay or opening and shutting the gate on an engine. Or, it can be changed over from a garden hose nozzle in seconds to fill an empty backpack pump.   Gooseneck design helps eliminate awkward hose connections in hard-to-reach areas. Features: Hose Shut Off Valve: Made of premium brass for durability. Swivel connectors for accurate attachment to faucet. Leak-free plated brass ball valve. Adjustable Flow Control: With large plastic handle for easy grip, easy to turn on and off. 3/4" Water hose shut off valve connector perfect for garden, RV, lawn.
    read more
  • 2 Way Hose Splitter
    Forestry Heavy Duty Brass Y Valve 2 Way Garden Hose Splitter
    Forestry Heavy Duty Brass Y Valve 2 Way Garden Hose Splitter Converts a single water outlet into 2 ways, very convenient for you to control the work in different places simultaneously. Made of high-quality heavy-duty brass materials, solid and durable, corrosion proof, and has a long service time. All the hose connectors can be turned on and off individually, so you can use one or others according to your need.   Features: Standards Dimensions: Our water hose splitter fits most 3/4 inch faucets and garden hoses, a premium thread design for easy connection. 2-Way Hose Outlets: Garden hose splitter connects least to two hoses to one faucet and is very convenient for you to control the work in different places at the same time. Fit for all standard 3/4 diameter connections. High-Quality Brass Material: The brass hose splitter covered with TPR rubber makes it more touchable. Made of 100% solid brass body with ABS shut-off switch, solid and durable, corrosion proof, and has a long service time. Save Your Time and Your Energy: Converts a single water outlet into 2 ways, very convenient for you to control the work in different places at the same time. Split 1 Spigot Into 2 Outlets: Run 2 hoses from the same spigot with 2 way heavy duty hose splitter, and you can even connect more hoses to your backyard sink, drip irrigation, sprinkler timer system, hose end tap timer with more faucet splitter. Made for home, garden, backyard, and even wildland forestry fire fighting use.
    read more

top

Online Now