PVC Line Fire Hose
natural-rubber-lined-hose

  • Fire Fighting Hose Nozzle
    Spray Jet Brass Fire Fighting Hose Nozzle
    Spray Jet Brass Fire Fighting Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Brass Size   1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of solid brass. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Suction Strainer
  • Fire Hose Branch Pipe
    Brass Fire Hose Branch Pipe Fire Nozzle
    Brass Fire Hose Branch Pipe Fire Nozzle   1.Product introduction A branch pipe is a specific type of nozzle used by firefighters to douse the fire. Firefighters attach the branch pipe to the end of a fire hose pipe which can be adjusted by hand to shape, regulate and direct the water flow or fire safety agents.   Winner Branch Pipe Fire Nozzle has the option of a fog pattern or a straight stream. It can improve surface cooling compared to the full jet. It is usually made of brass or aluminum.   2.Product Parameter  Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Stream / Spray   3.Products Features This branch pipe nozzles has a rotating element that sets the splash mode. When the fighters rotate it to a single side the outlet produces a splash. When turning to the end, the vent produces a water veil that protects the person handling the nozzle from the heat of the fire.
    read more
  • Fire Diffuser Nozzle
    Brass Fire Hose Fire Diffuser Nozzle
    Brass Fire Hose Fire Diffuser Nozzle   1.Product introduction A fire diffuser nozzle is a specific type of nozzle used by firefighters to douse the fire. Firefighters attach the diffuser nozzle to the end of a fire hose pipe which can be adjusted by hand to shape, regulate and direct the water flow or fire safety agents.   Winner Fire Diffuser Nozzle has the option of a fog pattern or a straight stream. It can improve surface cooling compared to the full jet. It is usually made of brass or aluminum.   2.Product Parameter  Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Stream / Spray   3.Products Features This diffuser nozzle has a rotating element that sets the splash mode. When the fighters rotate it to a single side the outlet produces a splash. When turning to the end, the vent produces a water veil that protects the person handling the nozzle from the heat of the fire.
    read more
  • 3 Position Fire Nozzle
    Brass Fire Hose Diffuser 3 Position Fire Nozzle
    Brass Fire Hose Diffuser 3 Position Fire Nozzle   1.Product introduction 3-Position Fire Nozzle combine the pattern of straight stream and fog nozzles. The lever has three modles from shut-off to jet or spray. It is made of barss, corrosion resistant.   2.Product Parameter  Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Shut/Stream / Spray Couplings Storz, Machino, Instaneous, NH, Gost, Nakajima etc.   3.Products Features 1,The nozzles are available with shut-off valve and to threaded onto branchpipes. 2, Chrome brass ball is commonly used in the shut-off valve. Three stage open-to-close is designed and clearly marked on body. 3, Sheet nozzle covers the watering span of 90°.
    read more
  • Brass Marine Fire Nozzle
    Brass Marine Straight Stream Fire Fighting Hose Nozzle
    Brass Marine Straight Stream Fire Fighting Hose Nozzle   1.Product Description Straight stream nozzle shapes and directs water for fire application. Solid jet keeps working from a safe distance. It is usually made of brass or aluminum.It is one of important and indispensable water jetting tool for fire fighting equipment.    Technical Parameters: Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Stream Couplings Storz, Machino, Instaneous, NH, Gost, Nakajima etc.   3.Products Features A.Its operating pressure is 230 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach. B.This nozzle is available with two orifice sizes:12mm and 19mm C.Application:hydrant system,wet or dry riser system 
    read more
  • Fire Hose Divider
    Screwdown Valves Water Separator 2 Way Fire Hose Divider
    Screwdown Valves Water Separator 2 Way Fire Hose Divider 1.Product introduction Fire Hose Dividers are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut-off individually by means of a stop valve. dividing breeching is a popular product in the fire protection and water delivery market, used commonly  to split one length of hose to provide the handler with two or three outlets. It is available to order in a light alloy or gun metal finish.   All of our water delivery products can be adapted for use with any international fittings.   2.Product Parameter Item No. Inlet Outlet WD-052 2.5”Female thread BSP 2X1.5”Female thread BSP WD-052A 2.5”Male instantaneous BS336 2x2.5”Female instantaneous BS336   3.Products Features a.Material:Aluminum alloy / Copper alloy b.Inlet and outlet connection to BS336 instantaneous c.Red paint finish outside. d.Special connection inlet and outlet available upon request
    read more
  • Wye Hose Valve
    Fire Fighting 3 Way Wye Hose Valve
    Fire Fighting 3 Way Wye Hose Valve Durable, lightweight wye hose valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi.    Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type 3 Way Wye Hose Valve DN65 DN65*3 Ball Valve DN80 DN65*3 DN80*3  
    read more
  • Fire Hose Ball Valve
    2 Way Wye Fire Hose Ball Valve
    2 Way Wye Fire Hose Ball Valve Durable, lightweight wye valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi.    Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type 2 Way Wye Valve DN65 DN65*2 Ball Valve DN80 DN65*2 DN80*2
    read more
  • Fire Water Splitters
    Five Ways Fire Hose Water Splitters
    Five Ways Fire Hose Water Splitters Fire hose water splitters are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.   Aluminum construction full penetration welds, one storz 5" or 6" connection, five Machino 2.5" or 3" connections. Other configurations available consult for your specific requirements.   Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type Five Ways Fire Hose Water Splitters DN125 DN65*5 Gate Valve  DN80*5 DN150 DN65*5 DN80*5
    read more
  • Hose Shut off Clamp
    Wildland Forestry Fire Hose Shut off Clamp
    Wildland Forestry Fire Hose Shut off Clamp   For use on 1 1/2" synthetic and cotton/synthetic fire hoses to  interrupt water flow,    When it's inconvenient or dangerous to shut off a fire hose at the source, Winner Fire Hose Clamp delivers. This handheld, cast aluminum clamp can compress a 1 inch or 1-1/2 inch single-jacket fire hose, momentarily stopping the flow of water in the middle of a line to alter hose lays, change nozzles, add water thieves, sprinkler systems, etc..   Features: For use with single jacket 1″ and 1.5″ hose Lightweight Aluminum construction Engineered specifically with dual thickness settings Easy to operate while wearing gloves Carry in your pocket or hang from a belt.
    read more
  • Hydrant Wye Valve
    Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
    Fire Hydrant Water Splitter Wye Fire Hose Ball Valve 1. Product introduction Our ball valve wyes are designed to divide one stream of water into two, similar to our plain wyes. They’re also equipped with a female swivel inlet and two rigid male outlets. However, the ball valve wye’s ¼ turn handles give the user the ability to shut off water to either outlet.   2. Product Parameter Item No. Inlet Outlet FHS2515 2½” F Swivel NH 2X1.5” M NH FHS2515 - 2 2½” F Swivel NST 2x1.5” M NST   3. Products Features a.Material: Aluminum alloy b.Inlet and outlet connection to threaded couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request
    read more
  • Gun Type Fire Nozzle
    115 - 475 LPM Adjustable Pistol Grip Fire Nozzle
    115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle   Winner WFSN-475 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-475 has four flow classes,115-230-360-475 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1. Strong light weight anodized aluminum construction. 2. DuPont Nylon handle and pistol grip. 3. Stainless steel spinning teeth offers high quality fog performance. 4. Rubber bumper provides maximum durability in harsh condition. 5. Excellent for use with foam tube.   Product Parameter    Weight (excl.coupling) 1.8 kgs Material Body Lightweight hard anodized aluminum Valve Alu or SS304 Or Brass Handle Dupont Nylon  Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 120 ° Throw range 40 meter @ 7 bar Flow range (selectable) 115 LPS @7 bar 230 LPS @7 bar 360 LPS @7 bar 475 LPS @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling  NH, BSP, Storz, BS336, Forestry and Machino CouplingStorz,etc.
    read more
  • Hose Washer
    Fire Hose Washer Hose Cleaner
    Fire Hose Washer Hose Cleaner The Winner Hose Washer provides an easy means of cleaning all types of fire and water hoses.  Wide angle forward facing internal jets help to push the hose through the drum cleaning as it passes through. Only normal mainline pressure is required for fast, effective cleaning.   Fitted as standard with a 1.5" NPSH female threaded inlet for compatibility with any International Adaptor.   Features Fast Hose Cleaning Suitable for Hoses up to 77mm (3") Internal Jet Cleaning Forward-Facing Jets Pushes Hose Through the Drum 1 1/2" NPSH Female Threaded Inlet Robust Construction Key Users Fire & Rescue Services Airport Fire Crews Defence Sectors Major Industrials Marine & Off-Shore Sectors Petrochemicals Oil & Gas
    read more
  • Electric Fire Hose Roller
    Portable Electric Fire Hose Roller
    Portable Electric Fire Hose Roller Compact battery-operated fire hose roller tool with a powerful built-in electric motor minimizes the time required for reeling unwound fire hoses after action or training.  Robust steel frame. The heavy-duty parts of all the shafts are made of high-strength steel. Durable  surface finish – powder-coated. Powerful DC motor, water and dust resistant. Charger included. Safe  operation thanks to low working voltage. Durable control elements. Unique design ensuring high stability during winding and allows for easy handling of the wound hose.    SPECIFICATIONS FOR FIRE HOSE ROLLING MACHINE PRODUCT NAME Fire Hose Roller MATERIAL Steel SIZE 55*38*41cm WEIGHT 16.5kg BATTERY Working Time 1.5-2H RATED VOLTAGE 24V SUITABLE COUPLING DIAMETER 1.5''/2''/2.5''/3'' COLOR RED Feature Easy-to-operate fire hose winding system Small in size, light in weight, fast in speed, and  can be carried on board the vehicle Quick and convenient winding of fire hoses 1.5"~3" Intelligent control system adjusts the speed of winding Battery-operated, with screen to show volume   Applications • Rewinding fire hoses
    read more
  • Fire Hose Roller Trolley
    Multifunction Manual Fire Hose Roller Trolley
    Multifunction Manual Fire Hose Roller Trolley The Hose Roller Trolley is designed to quickly, cleanly and efficiently recoil layflat fire hoses after  use saving time and greatly reducing back strain minimising time off work through injury. Conventional coiling or Dutch rolling of hoses is possible fitted with any British or International Couplings. Once recoiled the Hose Roller Trolley is simply tilted left or right and the hose slips off perfectly coiled and ready for re-use.  Commonly used by Fire & Rescue Services but equally suited to any applications that use layflat fire  hoses.   SPECIFICATIONS FOR FIRE HOSE ROLLING MACHINE PRODUCT NAME Fire Hose Roller MATERIAL Steel SIZE 106*51*41cm WEIGHT 21kg SUITABLE COUPLING DIAMETER 1.5''/2''/2.5''/3'' COLOR RED Feature Easy-to-operate fire hose winding system High quality construction, powder coated Foldable, small in size, light in weight, fast in  speed, and can be carried on board the vehicle. Quick and convenient winding of fire hoses 1.5"~3" Multiple rolling styles, conventional or Dutch   Applications • Rewinding fire hoses
    read more

top

Online Now