Wholesale Best Water Spray Nozzle Products,Water Spray Nozzle Suppliers,manufacturers

Categories

Contact Us

86-0595-86801910 ivy.xiao7 info@winnerfirehose.com

Hot products

water-spray-nozzle

View :

Grid View List View

Electric Remote Control Fire Water Cannon for Fire Fighting
Electric Remote Control Fire Fighting Cannon For Fire Vehicle The remote control water cannon was designed as compact and reliable device. Horizontal and vertical positioning is accomplished by remotely controlled electric motors, equipped with insulated handles to facilitate safe manual override. The Fog/Jet nozzle can be adjusted between full jet and spray modes by a separate electric motor. Products Features ● SS304 stainless steel construction. ● Automatic Nozzle supply a stable flow at different flow rate. ● Available controlled both byJoystick at site and RC transmitter wireless. ● Waterproof control system with locking connectors. ● Rotation range 360° ● Elevation range +85°, - 55° ●AC 380V power supply Parameters: Model PSKD150 PSKD180 PSKD180 Flow Range 150 L/S (2375 GPM) 180 L/S (2850 GPM) 200 L/S (3170 GPM) Working Pressure 10 bar 10 bar 10 bar Max Reach @ Max Flow 105 m 110 m 115 m Range of motion -50°~+85° Vert,360° Rotation Max fog angle 120° Turning speed 7 degrees/sec Material (body) 304L Stainless Steel standard （316L Stainless Steel is also available） Material (Gear) Hardcoated anodizing aluminum Material (nozzle) Hardcoated anodizing aluminum Power supply AC 380V Power Consumption normal/Max 50W/300W Weight incl. nozzle appox 55 KG Cable Length Monitor- CPU 5m Cable Length Joystick-CPU 5m standard/ other length available Pipe dimensions for installation 6 Inch Monitor Inlet 6” flange Monitor Outlet 4 inch (100mm) Water way size 4 inch PACKAGE ● SS Monitor..............................1 set ● Monitor Nozzle.......................1 set ● Control Unit.............................1 pcs ● Joystick...................................1 pcs ●Cables......................................2 rolls (5m/roll) ● RC Transmitter........................1 pcs ● RC Receiver.............................1 pcs

Related Tags :
Fire Water Cannon Remote Control Water Cannon Water Cannon for Fire Fighting
read more
Manul Fire Control Foam Fire Monitor For Fire Fighting
Manul Fire Control Foam Fire Monitor For Fire Fighting The Foam/Water Monitor are highly manoeuvrable and easy to operate while delivering much more foam or water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features * Simple to operate * Foam/Water Nozzle * Easy to service and repair. * Hard coated anodized aluminium alloy Construction Parameters: Model PLZ24 PLZ32 PLZ40 PLZ48 PLZ64 Flow Rate 24LPS 32LPS 40LPS 48LPS 64LPS Working Pressure 10 bar 10 bar 10 bar 10 bar 10 bar Foam Jetting Range 40 Meter 45 Meter 50 Meter 55 Meter 60 Meter Water Jetting Range 45 Meter 50 Meter 55 Meter 60 Meter 65 Meter Foam Expansion >= 6 times >= 6 times >= 6 times >= 6 times >= 6 times Rotation Horizontally 360° 360° 360° 360° 360° Elevate Vertically -45° to 85° -45° to 85° -45° to 85° -45° to 85° -45° to 85° Inlet DN100(4") DN100(4") DN100(4") DN100(4") DN100(4") Outlet 2.5"NH 2.5"NH 2.5"NH 2.5"NH 2.5"NH Flange Standard BS4504,ANSI150,GB,etc Order Information 1) Specify Adaptor 2) Specify Size 3) Additional Notes

Related Tags :
Electric Monitor Fire Water Monitor Remote Control Fire Monitor
read more
20-30-40LPS Fire Truck Water Cannon
20-30-40LPS Fire Truck Water Cannon Fire water cannons are highly manoeuvrable and easy to operate while delivering much more water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features * Simple to operate * Adjustable Nozzle * Easy to service and repair. * Aluminium alloy Construction Key Users * Fire & Rescue Services * Oil & Gas * Petrochemicals * Fuel Storage Sites * Major Industrials * Aviation Product Parameter Material Body Aluminum Alloy Nozzle Aluminum Alloy Tiller Stainless Steel 304 Flow Range 1200-1800-2400 LPM Adjustable Nozzle Max.Fog Angle 120° Jetting Range@10 bar 60 meters@2400LPM Working Pressuce 10 bar Max Range Of Monitor -45° to +85° Vertically, 360° Rotation Water Way Size 2.5" Outlet 2.5" NH Inlet Flange 4” BS4504 is standard,other standard flange is available

Related Tags :
Fire Truck Water Cannon Fire Truck Cannon
read more
Adjustable Flow 30-50LPS Jet Fog Spray Water Cannon
Adjustable Flow 30-50LPS Jet Fog Spray Water Cannon Fire water cannons are highly manoeuvrable and easy to operate while delivering much more water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features 1) Aluminium alloy construction 2) Flow rate is adjustable 3) Jetting pattern: Straight stream,Fog 4) Horizontal rotation : 360° 5) Vertical elevate : -45° to +85° 6) Flange standard: BS4504,ANSI150,GB,etc. Key Users * Fire & Rescue Services * Oil & Gas * Petrochemicals * Fuel Storage Sites * Major Industrials * Aviation Product Parameter Model PS30-50 Control Tiller Flow Rate(Selectable) 1800-2400-3000 LPM Adjustable Nozzle Working Pressure 10 Bar Jetting Range @ 10 bar 65 meters @ 3000 LPM Max. Fog Angle 120° Rotation Horizontally 360° Elevate Vertically -45° to +85° Inlet DN100 (4" optional for BS4504,ANSI150,GB,etc.) Outlet 2.5'' NH

Related Tags :
Jet Water Cannon Adjustable Flow Water Cannon Jet Fog Spray Water Cannon
read more
Stacked Tips Nozzle Manual Fire Water Monitor
Stacked Tips Nozzle Manual Fire Water Monitor Fire water monitors are highly manoeuvrable and easy to operate while delivering much more water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features 1)Material: Aluminium alloy construction,hard coated anodized; 2)Flow Rate: Adjustablestacked tips 30 - 50 LPS; 3)Jetting Pattern: Straight stream; 4)Moving Range: 360° rotation horizontally, -45° to +90° elevate vertically 5)Flange standard: BS4504,ANSI150,GB,etc. Key Users * Fire & Rescue Services * Oil & Gas * Petrochemicals * Fuel Storage Sites * Major Industrials * Aviation 1) Stacked tips is to adjust the flow rate from 1800LPM to 3000 LPM; 2)Vertical lock is to make the monitor stable; 3)Through the handle to change the monitor's direction, to rotate the monitor 360° & up and down the monitor from -45°to 90°. Product Parameter Model Number PS 30-50T Flow Rate 1800LPM up to 3000LPM Working Pressure 10 Bar Max.Reach@10 Bar 65 m@3000LPM Max.Range of Motion -45° to +75° Vertically, 360° Rotation Waterway Size 2.5"(65mm) Waterway Inlet Flange 4” BS4504 is standard,other standard flange is available Waterway Outlet 2.5” (65mm) NH Male Thread Material Monitor & Nozzle - Hard coated anodized aluminium alloy Tiller - SS304 Stainless steel

Related Tags :
Water Monitor Manual Fire Water Monitor
read more
Attic Pistol Grip Attack Piercing Spike Fog Fire Nozzle Gun
Attic Pistol Grip Attack Piercing Spike Fog Fire Nozzle Gun Fog Spikes delivering fine water sprays through a variety of construction mediums without the need for firefighter entry. Integration with existing fire appliance pumps ensures complete compatibility of use - there are no ‘special requirements’ needed to existing equipment to use the Fog Spikes. The Fog Spikes are specifically designed to allow operatives to attack and improve pre-entry compartment fire conditions by rapidly reducing internal temperatures significantly reducing risk to firefighters and greatly limiting water damage. Main Features * Designed to efficiently extinguish fire in confined and hard-to- reach areas, such as storage facilities, attics and mobile homes. * Quick penetration of glass, crevice in masonry walls, concrete blocks, metal sheets and plywood * Provides rapid attack on hidden trouble spots * Impinging jets for a dense fog pattern Applications Roof, Loft and Basement Fires Thatch Fires Room / Compartment Fires Shop Fires Shed / Warehouse Fires Car & Lorry Fires Skip & Waste Bin Fires Peat Fires Brush / Forest Fires Shipping Container Fires Cabin Fires Aircraft Fires Waste Recycling Pile Fires Mud / Silt Aeration Specification Model Number WFN - P600 Material Anodized Aluminum Alloy Inlet Size 1.5"(40mm) , 2" ( 50mm ) , 2.5"(65mm) Coupling Storz/NH/BSP/Russian type, etc. Flow Rate 600LPM Working Pressure 7 Bar

Related Tags :
Spike Fog Nozzle Fire Nozzle Gun Attack Spike Fog Nozzle Fog Nozzle Pistol Grip Nozzle Piercing Nozzle
read more
Plastic Fire Hydrant Hose Nozzle
Plastic Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Plastic Fire Nozzle Hydrant Hose Nozzle Fire Hose Nozzle
read more
BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle
BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle 1.Product Introduction Fire Hose Diffuser Nozzles are widely demanded in fire brigades as the basic firefighting nozzle. It is offered in in different metals as per the requirements. The short one can easily fit with a choice of nozzles to suit the flow and operational requirement. 2.Product Parameter Material Aluminum Size 2.5 Inch Working pressure 16 Bar Discharge pattern Jet Spray 3. Product Feature Made of aluminum alloy material with rubber bumper. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Hose Diffuser Spray Jet Fire Hose Nozzle Hose Diffuser Nozzle
read more
1.5 Inch Brass Fire Hydrant Hose Nozzle
1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Hydrant Hose Nozzle 1.5 inch Fire Nozzle Brass Fire Hose Nozzle
read more
Spray Jet Brass Fire Fighting Hose Nozzle
Spray Jet Brass Fire Fighting Hose Nozzle 1.Product Introduction This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter Material Brass Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of solid brass. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.

Related Tags :
Fire Fighting Hose Nozzle Spray Jet Brass Nozzle Brass Fire Nozzle
read more
Hydroshield Jumbo Fire Water Curtain Nozzle
Hydroshield Jumbo Fire Water Curtain Nozzle 1.Product Description Winner Water Curtain nozzle is made of aluminum plate into a fan shape. It is suitable for petrochemical toxic gases and fire-fighting fires. Water curtain barriers are arranged to control the spread of smoke, reduce the temperature of fireworks, cover fires and save people. 2.Product Parameter Model WF-CN65 Max.Working Pressure 7 Bar Inlet Size 2.5" Flow Rate 1300 LPM -1600LPM Coupling BSP /Storz /NH /GOST /INST /Machino Material Aluminium Alloy 3.Products Features 1) suitable for petrochemical toxic gases and fire-fighting fire; 2) comfortable with Quick Attach fire hose; 3) Water curtain barriers are arranged to control the spread of smoke, reduce the temperature of fireworks, cover fires and save people

Related Tags :
Fire Water Curtain Nozzle Jumbo Water Curtain Nozzle Hydroshield Nozzle
read more
580 LPM Fire Protection and Rescue Stream Spray Defense Fire Nozzle
580 LPM Fire Protection and Rescue Stream Spray Defense Fire Nozzle Multi-Purpose Nozzles are technologically advanced nozzles with both solid bore and fog stream capability. The nozzle offers the flexibility to flow both at the same time or independently. Solid bore provides excellent reach and penetration at low pressure,whilst fog stream offers protection and rapid cooling. Inlet size is available in either 1-1/2" (38 mm),2" (50mm) or 2-1/2" (65 mm). The Multi-Purpose Nozzles allows with both Straight stream and fog stream capability, Offering the Flexibility to flow both at the samt time or independenty. The fog mode can help the fire fighter release the heat at the same time of straight stream pattern. Main Features 1. Strong Light Weight Aluminum Construction. 2. Tight Stream and 130° Wide Dense Fog Pattern. 3. Working Pressure: 100PSi or 7Bar. 4. Connection Size Available: 1.5'', 2.5''. 5. Connection Type Available: Storz, NH, BIC, or JIC. 6. Max Flow Distance: 34M. Product Parameter Type# Orifice Pressure (Bar) Flow Rate for Straight Stream (LPM) Flow Rate for Fog Pattern (LPM Flow Rate Total (LPM) QZH6.0/10ZB 3/8'' (10mm) 3.5 5 7 87 110 136 160 190 228 250 285 360 1/2'' 13mm 3.5 5 7 170 228 250 160 190 228 326 418 456 5/8'' 16mm 3.5 5 7 285 360 380 160 190 228 399 510 580

Related Tags :
Defense Fire Nozzle Stream Spray Fire Nozzle Fire Nozzle Fire Protection Nozzle Fire Rescue Fire Nozzle
read more
Fire Fighting Chemical Attack Dry Powder Fire Nozzle
Fire Fighting Chemical Attack Dry Powder Fire Nozzle Winner Attack Dry Powder Nozzle is a highly effective, robust and lightweight nozzle designed, providing high performance delivery of a wide range of dry powder extinguishing agents. Manufactured from hard anodised aluminium and fitted, the Attack Dry Powder Nozzle is designed to provide excellent corrosion resistance and is suited to multiple applications across a range of industry sectors and fire risk scenarios. Principally used to combat fires in flammable liquids, gases, and greases (Class B) the Attack Dry Powder Nozzle fulfills multiple applications including the protection of refinery processes and industrial machinery. Available in a choice on two standard threaded inlets (1” NH female or 1” BSP female) for compatibility to all international inlet fittings (available on request). Features: Strong Light Weight Aluminum Construction. With Shut off Ball Valve Anodized and anticorrosive. T5 heat treatment. Working Pressure: 10Bar. Connections Size Available: M39x2, Φ32 Max Flow Distance: 16M Suitable for oily fire such as oil depots, oil field, chemicals and etc Key Users: Aviation Defence Industrial Petrochemical Machinery Plants Fire Training Centres

Related Tags :
Dry Powder Fire Nozzle Attack Fire Nozzle Chemical Fire Nozzle Fire Fighting Nozzle Attack Dry Powder Nozzle
read more
500 LPM Constant Flow Pistol Grip Automatic Fire Nozzle
500 LPM Constant Flow Pistol Grip Automatic Fire Nozzle Winner turbo jet fire nozzle is a constant flow nozzle(flow remains constant and stable in all patterns). It can remain working when you change from different modes straight stream, fog spray or flush without shutting down. Main Features 1. Mainly equipped with firefighting forces and professional fire brigades for various fires. 2. Strong lightweight aluminum construction. 3. The flow rate is automatic adjusted based on the change of water pressure. 4. The water column has a long and stable range, and it still maintains quality range stability even at low pressure. 5. The recoil force is small. When it is pressurized or decompressed, the delay function works as a constant pressure to buffer the water flow change, which eliminate the recoil force on user and relieve the physical intensity on the user. 6. Nozzle is equipped with an atomized cone to make the spray more refined and better heat absorption effect. 7. Anodized and anticorrosive. T5 heat treatment. Product Parameter Weight (excl.coupling) 2.2 kgs Material Body Lightweight hard anodized aluminum Valve Aluminum Handle Horseshoe (Injection Molded Nylon red Handle) Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 130 ° Throw range 38 meter @ 7 bar Flow range 500 LPM (Automatic) Flush Inlet Size 1.5" (40 mm) Inlet coupling style Storz,INST.,NH,GOST,etc.

Related Tags :
Automatic Fire Nozzle Constant Flow Fire Nozzle Pistol Grip Automatic Fire Nozzle
read more
1 Inch Compact Wildland Forest Fire Nozzle Gun
1 Inch Compact Wildland Forest Fire Nozzle Gun Winner Forest Fire Nozzle is economical, lightweight, and dependable nozzles. Their rugged construction is compatible with the use of fresh water as well as firefighting foam concentrate. Other important operating features include: * Quick-acting pattern control from straight stream to wide fog * Fixed fog teeth; * Metal spinning fog teeth available on some models; * Easily flushable while flowing to clear trapped debris; * Quick-change fire hose coupling; Forest Fire Nozzle has a selectable flow range at 7 bar of 15,30,45 and 60 litres per minute to meet the individual needs of the fire fighter at any given time but alternative flow rates are available. Features: Model WFN - F25 Flow rate 15 - 30 - 45 - 60 LPM - Flush (Selectable) Working pressure 0.7MPa Inlet size 1"; 1.5" Coupling srandard STORZ; GOST;INST; etc. Material Hard anodized aluminium alloy

Related Tags :
Forest Fire Nozzle Wildland Fire Nozzle Compact Fire Nozzle 1 Inch Fire Nozzle
read more
115 - 475 LPM Adjustable Flow Brass Marine Fire Nozzle
115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle Winner marine fire nozzle is a constant flow nozzle with multiple flow settings for operator flow control. The marine fire nozzle has four flow classes,115-230-360-475 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations 5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube Product Parameter Weight (excl.coupling) 1.6 kgs Material Body Lightweight hard anodized aluminum Valve ABS Handle ABS Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 120 ° Throw range 40 meter @ 7 bar Flow range (selectable) 115 LPS @7 bar 230 LPS @7 bar 360 LPS @7 bar 475 LPS @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.

Related Tags :
Marine Fire Nozzle Brass Marine Fire Nozzle Brass Marine Nozzle Marine Nozzle
read more

first page
<< 1 2 3 4 5 6 7 >>
last page

A total of

pages