PVC Line Fire Hose
brass-shut-off-valve

  • CO2 Fire Extinguisher Safety Valve
    5KG CO2 Fire Extinguisher Safety Valve
    5KG CO2 Fire Extinguisher Safety Valve Material:Brass Inlet Thread : PZ27.8 Outlet Thread: W21.8 Gauge Connection Thread :NPT 1/8" Dip Tube Thread: M10*1 Other type Fire Extinguisher Valve Just Contact us for more information you are interested, and you will get quick response for your need.
    read more
  • Stainless Steel Fire Extinguisher Valve
    Stainless Steel Handle Dry Powder Fire Extinguisher Valve
    Stainless Steel Handle Dry Powder Fire Extinguisher Valve Nickel-Chrome plating on brass with SS handle Material:SS,Brass Inlet Thread :M30x1.5 Outlet Thread:M12x1.5 Gauge Connection Thread :PF 1/8 -28 Dip Tube Thread:M15x1.5 Just Contact us for more information you are interested, and you will get quick response for your need.
    read more
  • Vietnam Fire Hydrant
    Vietnam Fire Hydrant Water Distribution Valve
      Vietnam Fire Hydrant Water Distribution Valve Vietnam Fire Hydrant is used in warm areas with water in the barrel always. The outlets are individually controlled and the mechanical parts are easy to access above ground.   Specification Body material: Cast Iron  Outlet: DN65 Working pressure: 10bar (KG/CM2) Finishing: Red Epoxy coated Body     Ductile iron O-ring NBR Hose Outlet 2.5" Mounted Tooth and Lid  Aluminum Features: 1. Connect fire hose  with  water pipes quickly and conveniently. 2. Cast iron with high strength and durability. 3. An important equipment for urban roads, residential areas, industrial parks and some establishments where to guard public safety Just feel free to contact us or leave message for sample, price or details specifications, catalog or test report.
    read more
  • Wholesale best Ductile Iron Fire Hydrant Valve for Vietnam Russia
    Ductile Iron Fire Hydrant Valve for Vietnam Russia
    Ductile Iron Fire Hydrant Valve for Vietnam Russia Fire Hydrant Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship . normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .   Type: indoor fire hydrant Model: WFHV - 50 Material: made of ductile material Inlet interface: 50 mm-2 inch / 65mm - 2.5 inch Intake type: cylindrical pipe female thread Outlet type: cylindrical pipe male thread with duct buckle Outlet Diameter: 50 mm / 2 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: certification: ISO9001 in accordance with GB3445 china national standard
    read more
  • Wholesale best Plastic Cover Brass 1 Inch Fire Hose Reel Nozzle
    Plastic Cover Brass 1 Inch Fire Hose Reel Nozzle
    Plastic Cover Brass 1 Inch Fire Hose Reel Nozzle 1.Product Introduction This range is available with a choice with either 19mm or 25mm ribbed hose tail or with a 25mm (1″) male BSP thread. The threaded option allows a variety of British or International inlet adaptors to be screwed on for complete versatility of use. 2.Product Parameter  Code No. Inlet size WFHRN-019 3/4"; 19mm Jet / Spray WFHRN-025 1"; 25mm Jet / Spray 3.Products Features 1) Inlet: 3/4", 1"; Outlet: 18.5 2) Material:Brass and plastic  3) Quality: Guaranteed 4) Characteristic: Operation is easy and quick. Contact for best price now!
    read more
  • Fire Hose Reel Nozzle Price
    Brass Fire Hose Reel Nozzle Price
    Brass Fire Hose Reel Nozzle Price 1.Product Introduction The jet/spray brass hose reel nozzles are available with either a 19mm or 25mm serrated hose tail in Brass providing a durable, cost effective nozzle that can be either wired-on or clipped on to your chosen hose. A simple twist rotational nylon head allows for adjustment through jet and spray modes and provides an efficient water supply shut-off. Perfect for use with 19mm or 25mm hose reel tubing approved to EN671-1 supplied in rolls of 30 metres. 2.Product Parameter  Code No. Inlet size WFRN-019 3/4"; 19mm Jet / Spray WFRN-025 1"; 25mm Jet / Spray 3.Products Features a.Nozzles are precision machined to perform - straight stream through full fog and shutoff. b.Nozzles are listed for Class A and B fires. c.For agricultural equipment cleaning and fire protection. d.Suitable Medium: Water Contact for best price now!
    read more
  • BS336 Standard  Brass John Morris Fire Hose Coupling
  • Oblique landing valve
    2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve
    2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve Landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply. The landing valves are oblique type with threaded inlet and are manufactured with delivery hose connection and blank cap. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Technical Data Valve Type Oblique, Threaded Inlet Pressure Rating Low Pressure Valve Nominal Size DN 2 1/2" Working Pressure 15 Bar Maximum Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure
    read more
  • Straight Through Landing Valve
    2.5 Inch Straight Through Landing Valve
    2.5 Inch Straight Through Landing Valve Straight through landing valve is available in two types screw and flanged. There are suitable for installation on wet risers in a building or a hydrant, manufactured to comply to BS 5041 Part 1:1987 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.   Product Parameter Code No. WFLV - ST25 Body Material Copper Alloy Inlet 2.5”BSP male thread or flanged according to BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap &   chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5   Bar • Body Test at 22.5   Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet   Pressure   Products Features Body material : copper alloy Hand wheel :grey cast iron  Blank cap material :copper alloy  The hand wheel is BLACK painted and body to RED
    read more
  • fire hydrant landing valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve Oblique landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply. The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Product Parameter  Code No. WFLV - F25 Body Material Copper Alloy Inlet 2.5”BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap & chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure   Products Features Body material made of copper alloy to EN 1982 Hand wheel material made of grey cast iron to BS EN 1561 Blank cap material made of copper alloy to EN 1982 Possible to replace the gland seal when under pressure with the valve fully closed Disc facing rubber is of replaceable type Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use The hand wheel is BLACK painted and body to RED
    read more
  • Pressure Regulating Landing Valve
    2.5 Inch Pressure Regulating Landing Valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve The landing valves are pressure reducing type designed to provide a range of outlet pressure (5 bar -8 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar. High quality with most favourable price. Pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.   Code No. Inlet Outlet WFLV - PR25 BS4504 PN16 65MM 2.5”BS336 INST.FEMALE WFLV - PR25A BS4504 PN16 80MM 2.5”BS336 INST.FEMALE WFLV - PR25B Male BSP Thread 65mm 2.5”BS336 INST.FEMALE  Valve type:Oblique flanged inlet Pressure Rating:HP or LP Nominal Size:DN65 Test pressure:valve seat test at 22bar,body test at 30bar Flange drilling:BS4504   Product Features: 1. Suitable for inlet pressure up to 20bar 2.Reduced outlet static pressure can be set from 5 to 8bar 3.Outlet pressure remain constant with inlet pressure range from 7bar to 20bar 4. Pressure test to 30bar 5.Minimum Flowrate up to 1400L/M 6.Body : Copper Alloy to BS 1400 7.Handwheel : Grey Cast Iron to BS 1452 8.Inlet:Male 2.5"BSP 9.Outlet : Female instantaneous to BS 336 and other connections
    read more
  • Fire Pump Connector
    Vietnam Throat to Receive Water Fire Pump Connector
    Vietnam Throat to Receive Water Fire Pump Connector It is used to supply water to the fire fighting system by pumping water directly into the throat. The equipment is attached to the fire-fighting water pipe.   Water-receiving plants or fire-fighting pillars are often installed in conjunction with a fire-fighting system. Used to pump water from fire engines for the system.   Specification Body material: Cast Iron  Outlet: DN65 Inlet: DN100 Working pressure: 10bar (KG/CM2) Finishing: Red Epoxy coated   2.Parameters Body       Ductile iron O-ring NBR Hose Outlet 2.5" Mounted Tooth and Lid  Aluminum Features: 1. Connect fire hose  with  water pipes quickly and conveniently. 2. Cast iron with high strength and durability. 3. An important equipment for urban roads, residential areas, industrial parks and some establishments where to guard public safety Just feel free to contact us or leave message for sample, price or details specifications, catalog or test report.
    read more
  • Fire sprinkler with UL
  • Fire sprinkler type,ZST fire sprinkler,CCC fire sprinkler,CE Fire sprinkler
  • Fire Valve Storz
    2 Inch Brass Oblique Fire Valve Storz
    2 Inch Brass Oblique Fire Valve Storz Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .   Type: Fire Valve Storz Model: WFHV - B50 Material: Brass Inlet interface: 50 mm / 2 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: Manufacture and certified to DIN 14461    Name Indoor fire hydrant Body Material Brass Valve Rod Material Brass Size 50mm Packing Carton with pallet Delivery time 15-20 days OEM Avaliable Original Made In China
    read more
  • Thread Gate Valve
    Ductile Iron Water Seal Thread Gate Valve PN16
    Ductile Iron Water Seal Thread Gate Valve PN16 A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped (in order to be able to apply pressure on the sealing surface).   Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance.   Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation  Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance
    read more

top

Online Now