PVC Line Fire Hose
forestry-hose-shut-off-clamp

  • Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Fire Hose Diffuser
    BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle
    BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle 1.Product Introduction  Fire Hose Diffuser Nozzles are widely demanded in fire brigades as the basic firefighting nozzle. It is offered in in different metals as per the requirements. The short one can easily fit with a choice of nozzles to suit the flow and operational requirement.  2.Product Parameter  Material Aluminum  Size 2.5 Inch Working pressure 16 Bar Discharge pattern Jet Spray 3. Product Feature Made of aluminum alloy material with rubber bumper. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Brass Fire Hose Nozzle
    1.5 Inch Brass Fire Hydrant Hose Nozzle
    1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Fire Fighting Hose Nozzle
    Spray Jet Brass Fire Fighting Hose Nozzle
    Spray Jet Brass Fire Fighting Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Brass Size   1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of solid brass. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Suction Strainer
  • Fire Hose Branch Pipe
    Brass Fire Hose Branch Pipe Fire Nozzle
    Brass Fire Hose Branch Pipe Fire Nozzle   1.Product introduction A branch pipe is a specific type of nozzle used by firefighters to douse the fire. Firefighters attach the branch pipe to the end of a fire hose pipe which can be adjusted by hand to shape, regulate and direct the water flow or fire safety agents.   Winner Branch Pipe Fire Nozzle has the option of a fog pattern or a straight stream. It can improve surface cooling compared to the full jet. It is usually made of brass or aluminum.   2.Product Parameter  Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Stream / Spray   3.Products Features This branch pipe nozzles has a rotating element that sets the splash mode. When the fighters rotate it to a single side the outlet produces a splash. When turning to the end, the vent produces a water veil that protects the person handling the nozzle from the heat of the fire.
    read more
  • Fire Diffuser Nozzle
    Brass Fire Hose Fire Diffuser Nozzle
    Brass Fire Hose Fire Diffuser Nozzle   1.Product introduction A fire diffuser nozzle is a specific type of nozzle used by firefighters to douse the fire. Firefighters attach the diffuser nozzle to the end of a fire hose pipe which can be adjusted by hand to shape, regulate and direct the water flow or fire safety agents.   Winner Fire Diffuser Nozzle has the option of a fog pattern or a straight stream. It can improve surface cooling compared to the full jet. It is usually made of brass or aluminum.   2.Product Parameter  Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Stream / Spray   3.Products Features This diffuser nozzle has a rotating element that sets the splash mode. When the fighters rotate it to a single side the outlet produces a splash. When turning to the end, the vent produces a water veil that protects the person handling the nozzle from the heat of the fire.
    read more
  • 3 Position Fire Nozzle
    Brass Fire Hose Diffuser 3 Position Fire Nozzle
    Brass Fire Hose Diffuser 3 Position Fire Nozzle   1.Product introduction 3-Position Fire Nozzle combine the pattern of straight stream and fog nozzles. The lever has three modles from shut-off to jet or spray. It is made of barss, corrosion resistant.   2.Product Parameter  Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Shut/Stream / Spray Couplings Storz, Machino, Instaneous, NH, Gost, Nakajima etc.   3.Products Features 1,The nozzles are available with shut-off valve and to threaded onto branchpipes. 2, Chrome brass ball is commonly used in the shut-off valve. Three stage open-to-close is designed and clearly marked on body. 3, Sheet nozzle covers the watering span of 90°.
    read more
  • Brass Marine Fire Nozzle
    Brass Marine Straight Stream Fire Fighting Hose Nozzle
    Brass Marine Straight Stream Fire Fighting Hose Nozzle   1.Product Description Straight stream nozzle shapes and directs water for fire application. Solid jet keeps working from a safe distance. It is usually made of brass or aluminum.It is one of important and indispensable water jetting tool for fire fighting equipment.    Technical Parameters: Material Brass Size 1.5" / 2" / 2.5"  Working pressure 16 Bar Discharge pattern Stream Couplings Storz, Machino, Instaneous, NH, Gost, Nakajima etc.   3.Products Features A.Its operating pressure is 230 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach. B.This nozzle is available with two orifice sizes:12mm and 19mm C.Application:hydrant system,wet or dry riser system 
    read more
  • Fire Hose Divider
    Screwdown Valves Water Separator 2 Way Fire Hose Divider
    Screwdown Valves Water Separator 2 Way Fire Hose Divider 1.Product introduction Fire Hose Dividers are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut-off individually by means of a stop valve. dividing breeching is a popular product in the fire protection and water delivery market, used commonly  to split one length of hose to provide the handler with two or three outlets. It is available to order in a light alloy or gun metal finish.   All of our water delivery products can be adapted for use with any international fittings.   2.Product Parameter Item No. Inlet Outlet WD-052 2.5”Female thread BSP 2X1.5”Female thread BSP WD-052A 2.5”Male instantaneous BS336 2x2.5”Female instantaneous BS336   3.Products Features a.Material:Aluminum alloy / Copper alloy b.Inlet and outlet connection to BS336 instantaneous c.Red paint finish outside. d.Special connection inlet and outlet available upon request
    read more
  • Wye Hose Valve
    Fire Fighting 3 Way Wye Hose Valve
    Fire Fighting 3 Way Wye Hose Valve Durable, lightweight wye hose valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi.    Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type 3 Way Wye Hose Valve DN65 DN65*3 Ball Valve DN80 DN65*3 DN80*3  
    read more
  • Fire Hose Ball Valve
    2 Way Wye Fire Hose Ball Valve
    2 Way Wye Fire Hose Ball Valve Durable, lightweight wye valves are constructed of high-quality aluminum with anodized hose adaptors built for rugged use. The valve opens and closes with a quarter turn. Polymer ball and seat/seal mechanism with o-rings provides a reliable seal and ease of operation at working pressures of 145 psi.    Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type 2 Way Wye Valve DN65 DN65*2 Ball Valve DN80 DN65*2 DN80*2
    read more
  • Fire Water Splitters
    Five Ways Fire Hose Water Splitters
    Five Ways Fire Hose Water Splitters Fire hose water splitters are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.   Aluminum construction full penetration welds, one storz 5" or 6" connection, five Machino 2.5" or 3" connections. Other configurations available consult for your specific requirements.   Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type Five Ways Fire Hose Water Splitters DN125 DN65*5 Gate Valve  DN80*5 DN150 DN65*5 DN80*5
    read more
  • Water Divider for Forest
    Fire Siamese Ball Type Shut off Water Divider for Forest Fire Fighting
    Fire Siamese Ball Type Shut off Water Divider for Forest Fire Fighting 1.Product introduction Fire Water Dividers are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut-off individually by means of a stop valve. dividing breeching is a popular product in the fire protection and water delivery market, used commonly  to split one length of hose to provide the handler with two or three outlets.    All of our water delivery products can be adapted for use with any international fittings.   2.Product Parameter Item No. Inlet Outlet WD2F 1”  2X1” WD2F-2 1.5” 2x1”   3.Products Features a.Material:Aluminum alloy b.Inlet and outlet connection to forest couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request
    read more
  • Poppet Check Valve
  • Forestry Fire Nozzle
    1.5 Inch Twin Tip Straight Stream Forestry Fire Nozzle
    1.5 Inch Twin Tip Straight Stream Forestry Fire Nozzle Straight stream nozzle shapes and directs water for fire application. Solid jet keeps working from a safe distance. It is usually made of brass or aluminum.It is one of important and indispensable water jetting tool for fire fighting equipment.    The solid one piece reversible twin tips have 1/4" and 3/8" orifices.   Technical Parameters: Material Brass Size 1.5"  Working pressure 16 Bar Discharge pattern Stream Couplings Storz, Machino, Instaneous, NH, Gost, Nakajima etc.   
    read more

top

Online Now