PVC Line Fire Hose
fire-hose

  • Fire Water Segregator
    Four Ways Fire Fighting Water Segregator
    Four Ways Fire Fighting Water Segregator Fire fighting water segregators are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.   Aluminum construction full penetration welds, one storz 5", 6", 12" connection, four Machino 2.5", 3", 6" connections. Other configurations available consult for your specific requirements.   Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type Four Ways Fire Fighting Water Segregator DN125 DN65*4 Butterfly Valve  DN80*4 DN150 DN65*4 DN80*4 DN300 DN150*4
    read more
  • Fire Water Splitters
    Five Ways Fire Hose Water Splitters
    Five Ways Fire Hose Water Splitters Fire hose water splitters are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.   Aluminum construction full penetration welds, one storz 5" or 6" connection, five Machino 2.5" or 3" connections. Other configurations available consult for your specific requirements.   Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type Five Ways Fire Hose Water Splitters DN125 DN65*5 Gate Valve  DN80*5 DN150 DN65*5 DN80*5
    read more
  • Water Manifold
    Eight Ports Fire Pump Water Manifold
    Eight Ports Fire Pump Water Manifold Fire manifolds are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut off individually by means of a stop valve. The stop valve of the dividers must be easy operated in the usual flow direction at 16 bar and in the opposite direction at 6 bar.   Aluminum construction full penetration welds, one multi lug 12" connection, eight Machino 2.5" connections. Other configurations available consult for your specific requirements.   Other connections are available such as BS336, Storz etc.   Technical Parameters: Item Inlet Outlet Valve Type Eight Port Manifold DN300 DN150*2  DN80*6 Butterfly Valve / Stop Valve DN150*2  DN65*6 DN80*8 Butterfly Valve DN65*8 Butterfly Valve
    read more
  • Water Divider for Forest
    Fire Siamese Ball Type Shut off Water Divider for Forest Fire Fighting
    Fire Siamese Ball Type Shut off Water Divider for Forest Fire Fighting 1.Product introduction Fire Water Dividers are used for distributing the extinguishing medium from one feed line over several hose lines, or in special cases for collecting it in the reverse direction. Each hose line can be shut-off individually by means of a stop valve. dividing breeching is a popular product in the fire protection and water delivery market, used commonly  to split one length of hose to provide the handler with two or three outlets.    All of our water delivery products can be adapted for use with any international fittings.   2.Product Parameter Item No. Inlet Outlet WD2F 1”  2X1” WD2F-2 1.5” 2x1”   3.Products Features a.Material:Aluminum alloy b.Inlet and outlet connection to forest couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request
    read more
  • Suction Filter
  • Forestry Fire Nozzle
    1.5 Inch Twin Tip Straight Stream Forestry Fire Nozzle
    1.5 Inch Twin Tip Straight Stream Forestry Fire Nozzle Straight stream nozzle shapes and directs water for fire application. Solid jet keeps working from a safe distance. It is usually made of brass or aluminum.It is one of important and indispensable water jetting tool for fire fighting equipment.    The solid one piece reversible twin tips have 1/4" and 3/8" orifices.   Technical Parameters: Material Brass Size 1.5"  Working pressure 16 Bar Discharge pattern Stream Couplings Storz, Machino, Instaneous, NH, Gost, Nakajima etc.   
    read more
  • Hose Shut off Clamp
    Wildland Forestry Fire Hose Shut off Clamp
    Wildland Forestry Fire Hose Shut off Clamp   For use on 1 1/2" synthetic and cotton/synthetic fire hoses to  interrupt water flow,    When it's inconvenient or dangerous to shut off a fire hose at the source, Winner Fire Hose Clamp delivers. This handheld, cast aluminum clamp can compress a 1 inch or 1-1/2 inch single-jacket fire hose, momentarily stopping the flow of water in the middle of a line to alter hose lays, change nozzles, add water thieves, sprinkler systems, etc..   Features: For use with single jacket 1″ and 1.5″ hose Lightweight Aluminum construction Engineered specifically with dual thickness settings Easy to operate while wearing gloves Carry in your pocket or hang from a belt.
    read more
  • Fire Nozzle Shut Off
    DC Jetting Direct Stream Fire Nozzle Shut Off
      DC Jetting Direct Stream Fire Nozzle Shut Off   1.Product Introduction  Fire nozzle shut off is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water and easy shut off with single lever.   2.Product Parameter  Material Aluminum Alloy Size 2" Working pressure 25 Bar Test pressure 37.5 Bar Discharge pattern Direct Stream Rated DC Flow Rate 7.5L/S Jet Distance ≥ 28M
    read more
  • Storz Hydrant Standpipe
    Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe
    Aluminum Alloy Single Outlet Storz Fire Hydrant Standpipe   Fire standpipe is basically a fire hydrant inside a building. Firefighters connect hoses to the standpipe to access water used to fight a building fire. Standpipes connect to a building's main water supply through a series of smaller pipes. It is a simple outdoor fire hydrant to used with underground fire hydrant.   Specification Standpipe shaft: Alu.alloy  Standpipe base&head: Alu.alloy Gasket: Rubber  Size: Inlet 2", Outlet 2" storz Working pressure: 10Bar
    read more
  • Single Outlet Standpipe
    Single Outlet BS Aluminum Fire Hydrant Standpipe
    Single Outlet BS Aluminum Fire Hydrant Standpipe   Standpipes are available from Winner in a number of different types. They screw onto the outlet of the underground hydrant.   Single outlet fire hydrant standpipes come with a swivel connection to a shaft.The standpipe has a 2.5” female URT inlet and a twist release 2.5”female instantaneous outlet     2.Product Parameter Model No SHS02 Inlet 2.5”female URT Outlet 2.5”Female instantaneous with plastic cap and chain   3.Products Features A.Standpipe shaft: aluminium alloy to BS 1474 B.standpipe base & Head:Aluminium alloy to BS1490
    read more
  • Double Outlet Standpipe
    Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe
    Aluminum Alloy Double Outlet BS Fire Hydrant Standpipe   1.Product Introduction  Standpipes are available in single or double outlet 65mm female instantaneous BS 336 and are connected to the shaft with a 65mm Male and Female Instantaneous (Double pull Release Type), or a swivel gland that will allow continuous rotation of the head through 360 deg.   The head with an instantaneous connection may be removed but the swivel type is an integral part of the standpipe. Double outlet standpipe is supplied with a single 65mm male blank plug.   2.Product Parameter  Model No SHS02 DHS Inlet 2.5" female URT 2.5" female BSRT Outlet 2.5" Female instantaneous with plastic cap and chain Double headed 21/2" Inst.Female with plastic cap and chain   3.Products Features A.Standpipe shaft:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 B.Standpipe Base and Head:Aluminum Alloy to BS 1490 Copper Alloy to BS 2873 C.Working Pressure:15 bar (217 psi) D.Test Pressure:22.5 bar (326 psi)

    Related Tags :

    Double Outlet Standpipe
    read more
  • Wholesale best Adjustable Fire Hydrant Wrench
    Adjustable Fire Hydrant Wrench
    Feature of adjustable spanners 1.Corrosion resistant plating 2.Strong, forged steel construction 3.Fit pentagon or square nuts SPECIFICATIONS Adjustable Yes Color Silver Length [In] 20.0 Manufacturer Warranty REED Warranty Maximum Opening (In) 1.75 Maximum Pipe / Tube Diameter (In) 1.75 Minimum Pipe / Tube Diameter (In) 0.25 Set / Individual Individual Width (In) 3.0 Wrench Size 19.5 In. long x 3 In. wide x 1 In. high Wrench Material forged steel Wrench Style Adjustable Wrench Type hydrant
    read more
  • Hydrant Wye Valve
    Fire Hydrant Water Splitter Wye Fire Hose Ball Valve
    Fire Hydrant Water Splitter Wye Fire Hose Ball Valve 1. Product introduction Our ball valve wyes are designed to divide one stream of water into two, similar to our plain wyes. They’re also equipped with a female swivel inlet and two rigid male outlets. However, the ball valve wye’s ¼ turn handles give the user the ability to shut off water to either outlet.   2. Product Parameter Item No. Inlet Outlet FHS2515 2½” F Swivel NH 2X1.5” M NH FHS2515 - 2 2½” F Swivel NST 2x1.5” M NST   3. Products Features a.Material: Aluminum alloy b.Inlet and outlet connection to threaded couplings c.Red paint finish outside. d.Special connection inlet and outlet available upon request
    read more
  • Gun Type Fire Nozzle
    115 - 475 LPM Adjustable Pistol Grip Fire Nozzle
    115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle   Winner WFSN-475 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-475 has four flow classes,115-230-360-475 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1. Strong light weight anodized aluminum construction. 2. DuPont Nylon handle and pistol grip. 3. Stainless steel spinning teeth offers high quality fog performance. 4. Rubber bumper provides maximum durability in harsh condition. 5. Excellent for use with foam tube.   Product Parameter    Weight (excl.coupling) 1.8 kgs Material Body Lightweight hard anodized aluminum Valve Alu or SS304 Or Brass Handle Dupont Nylon  Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 120 ° Throw range 40 meter @ 7 bar Flow range (selectable) 115 LPS @7 bar 230 LPS @7 bar 360 LPS @7 bar 475 LPS @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling  NH, BSP, Storz, BS336, Forestry and Machino CouplingStorz,etc.
    read more
  • Hose Washer
    Fire Hose Washer Hose Cleaner
    Fire Hose Washer Hose Cleaner The Winner Hose Washer provides an easy means of cleaning all types of fire and water hoses.  Wide angle forward facing internal jets help to push the hose through the drum cleaning as it passes through. Only normal mainline pressure is required for fast, effective cleaning.   Fitted as standard with a 1.5" NPSH female threaded inlet for compatibility with any International Adaptor.   Features Fast Hose Cleaning Suitable for Hoses up to 77mm (3") Internal Jet Cleaning Forward-Facing Jets Pushes Hose Through the Drum 1 1/2" NPSH Female Threaded Inlet Robust Construction Key Users Fire & Rescue Services Airport Fire Crews Defence Sectors Major Industrials Marine & Off-Shore Sectors Petrochemicals Oil & Gas
    read more
  • Electric Fire Hose Roller
    Portable Electric Fire Hose Roller
    Portable Electric Fire Hose Roller Compact battery-operated fire hose roller tool with a powerful built-in electric motor minimizes the time required for reeling unwound fire hoses after action or training.  Robust steel frame. The heavy-duty parts of all the shafts are made of high-strength steel. Durable  surface finish – powder-coated. Powerful DC motor, water and dust resistant. Charger included. Safe  operation thanks to low working voltage. Durable control elements. Unique design ensuring high stability during winding and allows for easy handling of the wound hose.    SPECIFICATIONS FOR FIRE HOSE ROLLING MACHINE PRODUCT NAME Fire Hose Roller MATERIAL Steel SIZE 55*38*41cm WEIGHT 16.5kg BATTERY Working Time 1.5-2H RATED VOLTAGE 24V SUITABLE COUPLING DIAMETER 1.5''/2''/2.5''/3'' COLOR RED Feature Easy-to-operate fire hose winding system Small in size, light in weight, fast in speed, and  can be carried on board the vehicle Quick and convenient winding of fire hoses 1.5"~3" Intelligent control system adjusts the speed of winding Battery-operated, with screen to show volume   Applications • Rewinding fire hoses
    read more

top

Online Now