PVC Line Fire Hose
groove-os-y-gate-valve

  • Fire Hose Spray Nozzle
    Lancia Frazionatrice UNI 45 Plastic Fire Hose Spray Nozzle
    UNI 45 Plastic Fire Hose Spray Nozzle 1.Product Introduction  UNI 45 plastic fire spray nozzle is a fire extinguishing device that is connected to a hose to spray a dense, full stream of water. It has the advantages of long range and large amount of water.   2.Product Parameter  Material Aluminum & Plastic Size 45mm  Working pressure 16 Bar Test pressure 24 Bar Discharge pattern Jet Spray
    read more
  • Gun Type Fire Nozzle
    115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle
    115 - 475 LPM Adjustable Spray Gun Type Fire Nozzle   Winner WFSN-475 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-475 has four flow classes,115-230-360-475 LPS, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube   Product Parameter    Weight (excl.coupling) 1.6 kgs Material Body Lightweight anodized aluminum Valve Aluminum Alloy Handle Dupont Nylon Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 16 bar (232 psi) Max. fog angle 130 ° Throw range 40 meter @ 7 bar Flow range (selectable) 115 LPS @7 bar 230 LPS @7 bar 360 LPS @7 bar 475 LPS @7 bar Flush Inlet size 1.5 inch, 2 inch, 2.5 inch (Optional). Connection coupling Storz,BS,NH,GOST,etc.
    read more
  • Turbojet
    Turbojet 50 - 235 LPM Fire Hose Nozzle
    50 - 235 LPM Spray Jet Fire Hose Nozzle Winner WFSN-235 gun type fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-230 has four flow classes,50-100-150-235 LPM, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair   Product Parameter    Model Number TN - C Weight 1.4kg Fire nozzle body Material Anodized Aluminum Fire Nozzle Handler Material Horseshoe (Injection Molded Nylon black Handle) Fire Nozzle Bumper Material Rubber  Swivel Inlet 1.5" ( 40mm ) recommended Coupling Storz/NH/BSP/Russian type, etc. Valve Type Aluminum / SS Flow Control Method 50-100-150-235 L/min Working Pressure  6 Bar Max Reach @ Max Flow 28 m Max fog angle 130 degree Fire Nozzle Type Pistol Grip 
    read more
  • Turbo Jet Fire Hose Nozzle
    200 - 760 LPM Turbo Jet Fire Hose Nozzle
    200 - 760 LPM Turbo Jet Fire Hose Nozzle   Winner turbo jet fire nozzle is a constant flow nozzle(flow remains constant and stable in all patterns). It can remain working when you change from different modes straight stream, fog spray or flush without shutting down. Main Features 1) Pattern Identification. 2) Hard Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube   Product Parameter    Weight (excl.coupling) 2.2 kgs Material Body Lightweight hard anodized aluminum Valve ABS Handle Horseshoe (Injection Molded Nylon red Handle) Bumper Rubber Working pressure 7 bar (100 psi) Max. pressure 25 bar (360 psi) Max. fog angle 130 ° Throw range 52 meter @ 7 bar Flow range 200 - 760 LPM (Automatic) Flush Inlet Size 1.5" (40 mm) Inlet coupling style Storz,INST.,NH,GOST,etc.
    read more
  • Pistol Grip Fire Nozzle
    360 - 950LPM Adjustable Flow Handline Pistol Grip Fire Nozzle
    360 - 950LPM Adjustable Flow Handline Pistol Grip Fire Nozzle Winner WFSN-950 pistol grip fire nozzle is a constant gallonage nozzle(flow remains the same in all patterns), with multiple flow settings for operator flow control.The WFSN-950 has four flow classes,360-475-570-760-950 LPM, and it is available both for straight stream,fog spray and flush without shutting down. Main Features 1) Pattern Identification. 2) Anodized Aluminum labels,Laser Engraved. 3) Simple to operate (1/4 turn from straight stream to fog) 4) Raised lug marks straight stream for limited visibility operations  5) Easy to service and repair. 6) CCC certificate. 7) Compatible with Quick Attach Foam Tube   Product Parameter  Model Number QLD6.0/15III-C Weight 2.7 kg Operation Type Handline Spray Pattern  Jet and fog Spray Swivel Inlet 2.5" ( 65mm ) recommended Coupling Storz/NH/BSP/Russian type, etc. Length 260mm Flow Control Method 360-475-570-760-950 L/min Working Pressure  7 Bar Max Reach @ Max Flow 37 m Max fog angle 130 degree Nozzle Type Selectable Flow Nozzle Media Water Application Fire fighting, Industrial
    read more
  • Oblique landing valve
    2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve
    2.5'' Brass Thread Inlet Oblique Fire Hydrant Landing Valve Landing valves are suitable for installation on wet risers in a building for fire fighting purposes, permanently charged with water from a pressurized supply. The landing valves are oblique type with threaded inlet and are manufactured with delivery hose connection and blank cap. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Technical Data Valve Type Oblique, Threaded Inlet Pressure Rating Low Pressure Valve Nominal Size DN 2 1/2" Working Pressure 15 Bar Maximum Test Pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure
    read more
  • Straight Through Landing Valve
    2.5 Inch Straight Through Landing Valve
    2.5 Inch Straight Through Landing Valve Straight through landing valve is available in two types screw and flanged. There are suitable for installation on wet risers in a building or a hydrant, manufactured to comply to BS 5041 Part 1:1987 standard with delivery hose connection and blank cap complying with BS 336:2010 standard.   Product Parameter Code No. WFLV - ST25 Body Material Copper Alloy Inlet 2.5”BSP male thread or flanged according to BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap &   chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5   Bar • Body Test at 22.5   Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet   Pressure   Products Features Body material : copper alloy Hand wheel :grey cast iron  Blank cap material :copper alloy  The hand wheel is BLACK painted and body to RED
    read more
  • fire hydrant landing valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve Oblique landing valves are suitable for installation on wet risers in a building for fire fighting purposes with permanently charged water from a pressurised supply. The landing valves are oblique type with flanged inlet and are manufactured to comply to BS 5041 Part 1 standard with delivery hose connection and blank cap complying with BS 336:2010 standard. The landing valves are classified under low pressure and are suitable for use at nominal inlet pressure up to 15 bar.   Product Parameter  Code No. WFLV - F25 Body Material Copper Alloy Inlet 2.5”BS4504 Outlet 2.5”BS 336 Female coupling with plastic cap & chain Pressure Rating Low Pressure Valve Test pressure Valve Seat Test at 16.5 Bar • Body Test at 22.5 Bar Water Flow Rate 8.5 L/S @ 4 Bar Outlet Pressure   Products Features Body material made of copper alloy to EN 1982 Hand wheel material made of grey cast iron to BS EN 1561 Blank cap material made of copper alloy to EN 1982 Possible to replace the gland seal when under pressure with the valve fully closed Disc facing rubber is of replaceable type Valves are provided with a strap and pad lock so that the hand wheel can be secured to counter unauthorized use The hand wheel is BLACK painted and body to RED
    read more
  • Pressure Regulating Landing Valve
    2.5 Inch Pressure Regulating Landing Valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve The landing valves are pressure reducing type designed to provide a range of outlet pressure (5 bar -8 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar. High quality with most favourable price. Pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.   Code No. Inlet Outlet WFLV - PR25 BS4504 PN16 65MM 2.5”BS336 INST.FEMALE WFLV - PR25A BS4504 PN16 80MM 2.5”BS336 INST.FEMALE WFLV - PR25B Male BSP Thread 65mm 2.5”BS336 INST.FEMALE  Valve type:Oblique flanged inlet Pressure Rating:HP or LP Nominal Size:DN65 Test pressure:valve seat test at 22bar,body test at 30bar Flange drilling:BS4504   Product Features: 1. Suitable for inlet pressure up to 20bar 2.Reduced outlet static pressure can be set from 5 to 8bar 3.Outlet pressure remain constant with inlet pressure range from 7bar to 20bar 4. Pressure test to 30bar 5.Minimum Flowrate up to 1400L/M 6.Body : Copper Alloy to BS 1400 7.Handwheel : Grey Cast Iron to BS 1452 8.Inlet:Male 2.5"BSP 9.Outlet : Female instantaneous to BS 336 and other connections
    read more
  • Fire Pump Connector
    Vietnam Throat to Receive Water Fire Pump Connector
    Vietnam Throat to Receive Water Fire Pump Connector It is used to supply water to the fire fighting system by pumping water directly into the throat. The equipment is attached to the fire-fighting water pipe.   Water-receiving plants or fire-fighting pillars are often installed in conjunction with a fire-fighting system. Used to pump water from fire engines for the system.   Specification Body material: Cast Iron  Outlet: DN65 Inlet: DN100 Working pressure: 10bar (KG/CM2) Finishing: Red Epoxy coated   2.Parameters Body       Ductile iron O-ring NBR Hose Outlet 2.5" Mounted Tooth and Lid  Aluminum Features: 1. Connect fire hose  with  water pipes quickly and conveniently. 2. Cast iron with high strength and durability. 3. An important equipment for urban roads, residential areas, industrial parks and some establishments where to guard public safety Just feel free to contact us or leave message for sample, price or details specifications, catalog or test report.
    read more
  • EN1540 Fire Hose with CE certificated
    EN14540 certificated PVC line Fire Hose
    1.CE approved 2.EN14540 Standard for fire hose 3.OEM/ODM service 4.Flexible and foldable
    read more
  • Fire Valve Storz
    2 Inch Brass Oblique Fire Valve Storz
    2 Inch Brass Oblique Fire Valve Storz Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .   Type: Fire Valve Storz Model: WFHV - B50 Material: Brass Inlet interface: 50 mm / 2 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: Manufacture and certified to DIN 14461    Name Indoor fire hydrant Body Material Brass Valve Rod Material Brass Size 50mm Packing Carton with pallet Delivery time 15-20 days OEM Avaliable Original Made In China
    read more
  • Layflat Hose Storz Coupling
    LDHC Layflat Hose Storz Coupling with No Lock
    1.Brass Material,Great quality. 2.Quality standard to the National fire fighting equipment, CCC certificated with ISO9001 quality management approve. 3.Service: OEM/ODM service for diameter, material, length, painting color working pressure etc.
    read more
  • PU Layflat Hose Coupling
    Large Bore PU Layflat Hose Coupling LDHC V with Teeth
    1.Brass Material,Great quality. 2.Quality standard to the National fire fighting equipment, CCC certificated with ISO9001 quality management approve. 3.Service: OEM/ODM service for diameter, material, length, painting color working pressure etc.
    read more
  • Hose Coupling LDHC V
    Large Bore Aluminum Hose Coupling LDHC V
    1.Brass Material,Great quality. 2.Quality standard to the National fire fighting equipment, CCC certificated with ISO9001 quality management approve. 3.Service: OEM/ODM service for diameter, material, length, painting color working pressure etc.
    read more
  • Thread Gate Valve
    Ductile Iron Water Seal Thread Gate Valve PN16
    Ductile Iron Water Seal Thread Gate Valve PN16 A gate valve, also known as a sluice valve, is a valve that opens by lifting a barrier (gate) out of the path of the fluid. Gate valves require very little space along the pipe axis and hardly restrict the flow of fluid when the gate is fully opened. The gate faces can be parallel but are most commonly wedge-shaped (in order to be able to apply pressure on the sealing surface).   Gate valves are used to shut off the flow of liquids rather than for flow regulation. When fully open, the typical gate valve has no obstruction in the flow path, resulting in very low flow resistance.   Gate Valve Applications Gate valves are used in almost all fluid services such as air, fuel gas, feedwater, steam, lube oil, hydrocarbon, and all most any services. Some special gate valve is used in slurry and powder product also such as knife gate valve Advantages of Gate Valve Gate valve provides good pressure drop during operation  Most of the gate valve can be used as bi-directional They are suitable for high pressure and temperature application and required less maintenance
    read more

top

Online Now