PVC Line Fire Hose
high-pressure-jet-nozzle

  • Pressure Regulating Landing Valve
    2.5 Inch Pressure Regulating Landing Valve
    2.5 Inch Flange Inlet Oblique Fire hydrant Landing Valve The landing valves are pressure reducing type designed to provide a range of outlet pressure (5 bar -8 bar). The Landing valves are classified under high pressure and are suitable for use at nominal inlet pressure up to 20 bar. High quality with most favourable price. Pressure reducing oblique landing valves are suitable for installation on wet risers in buildings for fire fighting purposes, permanently charged with water from a pressurised supply.   Code No. Inlet Outlet WFLV - PR25 BS4504 PN16 65MM 2.5”BS336 INST.FEMALE WFLV - PR25A BS4504 PN16 80MM 2.5”BS336 INST.FEMALE WFLV - PR25B Male BSP Thread 65mm 2.5”BS336 INST.FEMALE  Valve type:Oblique flanged inlet Pressure Rating:HP or LP Nominal Size:DN65 Test pressure:valve seat test at 22bar,body test at 30bar Flange drilling:BS4504   Product Features: 1. Suitable for inlet pressure up to 20bar 2.Reduced outlet static pressure can be set from 5 to 8bar 3.Outlet pressure remain constant with inlet pressure range from 7bar to 20bar 4. Pressure test to 30bar 5.Minimum Flowrate up to 1400L/M 6.Body : Copper Alloy to BS 1400 7.Handwheel : Grey Cast Iron to BS 1452 8.Inlet:Male 2.5"BSP 9.Outlet : Female instantaneous to BS 336 and other connections
    read more
  • Pressure Release Valve
    Water Pressure Release Valve for Fire Fighting
    Water Pressure Release Valve for Fire Fighting The valve consists of the main valve and outside installed control pilot valve, mainly installed in the bypass of the protected water supply system in the building, guarantee the pressure of the main valve upstream water supply zone, when the pressure in the water supply pipe exceeds the pressure set by the pressure releasing valve, the pressure releasing valve is switched on to prevent pipeline and equipment from damage by pressure exceeding. This valve is mainly used in pressure releasing of the fire test circulation system in high-rise buildings, is the upgrade replacement product of the spring safety valve.   Features: 1)Reasonable and novel structure, reasonable use of the hydraulic principle to control. 2)Long service life. 3)Valve clack quick opening and slow closure, no water hammer impacting. 4)High sensitivity, safe pressure discharge. 5)Stable operation, no noise.
    read more
  • Pressure Relief Valve
    Water Pressure Relief Valve for Fire Fighting
    Water Pressure Relief Valve for Fire Fighting This valve is used for the high building fore-fighting system,To prevent the pipeline and equipment damage due to overpressure. The body uses full passage streamline design, of a small fluid resistance and a heavy flow. This valve can be used as either a pressure releasing or holding valve.  when used as the former, it can release the pressure surpassing the safe value set with the pilot valve and keep the pressure inside of the pipeline below the safe value to prevent system against danger due to an excessively high water pressure;while used as the latter,it can keep the upstream water supply pressure of the main valve over some set value,this is because water supply to the downstream can not be done,unless the upstream is higher than the set value,in order to make sure of he upstream water supply pressure of the main valve.
    read more
  • High Velocity Water Spray Nozzle
  • Medium Velocity Spray Nozzles
  • Fire sprinkler type,ZST fire sprinkler,CCC fire sprinkler,CE Fire sprinkler
  • DN45 Brass Fire Valve
    DN45 Brass Fire Valve Barcelona with Pressure Gauge
    DN45 Brass Fire Valve Barcelona with Pressure Gauge Fire Valve is a connector to fire water supply with the valve interface, used for factory, warehouse, high-rise buildings, public buildings and ship, normally installed in fire hydrant box, with fire hoses and water gun or wait for equipment supporting the fire equipment .   Type: Fire Valve Barcelona Model: WFHV - B45 Material: Brass Inlet interface: 45 mm / 1.5 inch Rated working pressure: 1.6 Mpa For water and foam mixed liquid only Standard: Manufacture and certified to DIN 14461    Name Indoor fire hydrant Body Material Brass Valve Rod Material Brass Size DN45 Packing Carton with pallet Delivery time 15-30 days OEM Avaliable Original Made In China
    read more
  • Straight Fire Nozzle
    2 inch 52mm Plastic Straight Fire Nozzle
    2 inch 52mm Plastic Straight Fire Nozzle 1.Product Introduction  Straight fire nozzle,its inlet connection is 2” storz and outlet is straight stream nozzle.Material of construction is aluminum alloy and plastic.   2.Product Parameter  Material Aluminum & Plastic Size 25mm / 50mm / 65mm  Working pressure 8 Bar Discharge pattern Solid uniform Jet Pattern 3.Products Features Its operating pressure is 116 PSI Max and is naturally polished,It is a basic fire fighting nozzle commonly used by most fire Brigades.These smooth bore tips creates concentrated jet pattern of water flow with maximun reach.
    read more
  • Jet Water Cannon
    Adjustable Flow 30-50LPS Jet Fog Spray Water Cannon
    Adjustable Flow 30-50LPS Jet Fog Spray Water Cannon Fire water cannons are highly manoeuvrable and easy to operate while delivering much more water. forede Monitors are used across multiple industry sectors including Petrochemical Sites, Fuel Storage Facilities and Waste Recycling Sites. Monitors are compatible with forede's diverse range of master stream nozzles. with features to meet the changing demands of the fire service. Products Features 1) Aluminium alloy construction 2) Flow rate is adjustable 3) Jetting pattern: Straight stream,Fog 4) Horizontal rotation : 360° 5) Vertical elevate : -45° to +85° 6) Flange standard: BS4504,ANSI150,GB,etc. Key Users * Fire & Rescue Services * Oil & Gas * Petrochemicals * Fuel Storage Sites * Major Industrials * Aviation Product Parameter Model PS30-50 Control Tiller Flow Rate(Selectable) 1800-2400-3000 LPM Adjustable Nozzle Working Pressure 10 Bar Jetting Range @ 10 bar 65 meters @ 3000 LPM Max. Fog Angle 120° Rotation Horizontally 360° Elevate Vertically  -45° to +85° Inlet DN100 (4" optional for BS4504,ANSI150,GB,etc.) Outlet 2.5'' NH
    read more
  • Spike Fog Nozzle
    Attic Pistol Grip Attack Piercing Spike Fog Fire Nozzle Gun
    Attic Pistol Grip Attack Piercing Spike Fog Fire Nozzle Gun Fog Spikes delivering fine water sprays through a variety of construction mediums without the need for firefighter entry. Integration with existing fire appliance pumps ensures complete compatibility of use - there are no ‘special requirements’ needed to existing equipment to use the Fog Spikes.  The Fog Spikes are specifically designed to allow operatives to attack and improve pre-entry compartment fire conditions by rapidly reducing internal temperatures significantly reducing risk to firefighters and greatly limiting water damage. Main Features * Designed to efficiently extinguish fire in confined and hard-to- reach areas, such as storage facilities, attics and mobile homes. * Quick penetration of glass, crevice in masonry walls, concrete blocks, metal sheets and plywood * Provides rapid attack on hidden trouble spots * Impinging jets for a dense fog pattern Applications Roof, Loft and Basement Fires  Thatch Fires  Room / Compartment Fires  Shop Fires  Shed / Warehouse Fires  Car & Lorry Fires  Skip & Waste Bin Fires  Peat Fires  Brush / Forest Fires  Shipping Container Fires  Cabin Fires  Aircraft Fires  Waste Recycling Pile Fires  Mud / Silt Aeration    Specification Model Number WFN - P600 Material Anodized Aluminum Alloy Inlet Size 1.5"(40mm) , 2" ( 50mm ) , 2.5"(65mm)  Coupling Storz/NH/BSP/Russian type, etc.     Flow Rate 600LPM Working Pressure  7 Bar
    read more
  • Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle
    Plastic Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Plastic Size 1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of polyamide resin with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Fire Hose Diffuser
    BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle
    BS Quick Connect Spray Jet Fire Hose Diffuser Nozzle 1.Product Introduction  Fire Hose Diffuser Nozzles are widely demanded in fire brigades as the basic firefighting nozzle. It is offered in in different metals as per the requirements. The short one can easily fit with a choice of nozzles to suit the flow and operational requirement.  2.Product Parameter  Material Aluminum  Size 2.5 Inch Working pressure 16 Bar Discharge pattern Jet Spray 3. Product Feature Made of aluminum alloy material with rubber bumper. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Brass Fire Hose Nozzle
    1.5 Inch Brass Fire Hydrant Hose Nozzle
    1.5 Inch Brass Fire Hydrant Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material brass Size 1.5 inch Max working pressure 100 psi Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of brass with rubber gaskets. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Fire Fighting Hose Nozzle
    Spray Jet Brass Fire Fighting Hose Nozzle
    Spray Jet Brass Fire Fighting Hose Nozzle 1.Product Introduction  This is a nozzle suit to connect with fire hydrant hose / rack hose. It is a device used to supply water, provided with a adaptor for connection to spray a dense, full stream of water. 2.Product Parameter  Material Brass Size   1.5 inch Max working pressure 100 psi Flow rate 80 GPM Discharge pattern Capable of complete shutoff, straight stream or any degree of conical fog 3. Product Feature Made of solid brass. Its robustness and ergonomic design makes it highly manoeuvrable by extreme impact resistance. The passage from closed to full jet or vaporized and is regulated by the rotation of the neck at the front.
    read more
  • Water Curtain Nozzle
    Hydroshield Jumbo Fire Water Curtain Nozzle
    Hydroshield Jumbo Fire Water Curtain Nozzle   1.Product Description Winner Water Curtain nozzle is made of aluminum plate into a fan shape. It is suitable for petrochemical toxic gases and fire-fighting fires. Water curtain barriers are arranged to control the spread of smoke, reduce the temperature of fireworks, cover fires and save people.   2.Product Parameter     Model  WF-CN65 Max.Working Pressure 7 Bar Inlet Size 2.5" Flow Rate 1300 LPM -1600LPM Coupling BSP /Storz /NH /GOST /INST /Machino Material  Aluminium Alloy 3.Products Features  1) suitable for petrochemical toxic gases and fire-fighting fire; 2) comfortable with Quick Attach fire hose; 3) Water curtain barriers are arranged to control the spread of smoke, reduce the temperature of fireworks, cover fires and save people
    read more
  • Defense Fire Nozzle
    580 LPM Fire Protection and Rescue Stream Spray Defense Fire Nozzle
    580 LPM Fire Protection and Rescue Stream Spray Defense Fire Nozzle Multi-Purpose Nozzles are technologically advanced nozzles with both solid bore and fog stream capability. The nozzle offers the flexibility to flow both at the same time or independently. Solid bore provides excellent reach and penetration at low pressure,whilst fog stream offers protection and rapid cooling. Inlet size is available in either 1-1/2" (38 mm),2" (50mm) or 2-1/2" (65 mm).   The Multi-Purpose Nozzles allows with both Straight stream and fog stream capability, Offering the Flexibility to flow both at the samt time or independenty. The fog mode can help the fire fighter release the heat at the same time of straight stream pattern.  Main Features 1. Strong Light Weight Aluminum Construction.  2. Tight Stream and 130° Wide Dense Fog Pattern.  3. Working Pressure: 100PSi or 7Bar.  4. Connection Size Available: 1.5'', 2.5''. 5. Connection Type Available: Storz, NH, BIC, or JIC. 6. Max Flow Distance: 34M.  Product Parameter  Type# Orifice Pressure (Bar) Flow Rate for Straight Stream (LPM) Flow Rate for Fog Pattern (LPM Flow Rate Total (LPM) QZH6.0/10ZB 3/8'' (10mm) 3.5 5 7 87 110 136 160 190 228 250 285 360 1/2'' 13mm 3.5 5 7 170 228 250 160 190 228 326 418 456 5/8'' 16mm 3.5 5 7 285 360 380 160 190 228 399 510 580
    read more

top

Online Now